how to fill suorin drop

Mastering Suorin Drop: A Step-by-Step Guide to Filling

By James Walker
AD

The Suorin Drop is a stylish, pod-based system that's a breeze to use, and filling it is just as straightforward. Here's a step-by-step guide to help you refill your Suorin Drop effortlessly.

Before we dive into the process, ensure you're using e-liquid with a Vegetable Glycerin (VG) content of 60% or lower, as higher VG liquids can clog the coil and impact the performance of your Suorin Drop.

Preparing Your Suorin Drop and E-Liquid

Begin by ensuring your Suorin Drop is turned off. You can do this by pressing the power button five times in rapid succession.

AD
how to fill suorin drop
how to fill suorin drop
Here’s a quick guide to choosing the strength of your e-liquid
Here’s a quick guide to choosing the strength of your e-liquid
Building a Reliable Formaldehyde Sensor with SFA40 🌿
Building a Reliable Formaldehyde Sensor with SFA40 🌿

Tilt your Suorin Drop to expose the filling port. This can be found at the bottom of the device, hidden beneath the mouthpiece. Gently pull out the mouthpiece to reveal the port.

Choosing and Priming Your Coil

Suorin Drops use replaceable coils. Before filling, ensure you've primed your coil to prevent dry hits and extended coil lifespan.

Tutorial: Adding a USB Submersible Pump to the Smart Garden System - SwitchDoc Labs Blog
Tutorial: Adding a USB Submersible Pump to the Smart Garden System - SwitchDoc Labs Blog
Memory is too expensive so I made my own
Memory is too expensive so I made my own

To prime, drip a few drops of your e-liquid directly onto the coil and let it soak for a few minutes. This allows the cotton to absorb the e-liquid, ensuring even saturation and a smooth vaping experience.

Gathering Your Materials

Now, gather your e-liquid and a bottle with a needle tip or a glass dropper. The needle tip or dropper will help you control the amount of e-liquid you dispense, preventing spills and leaks.

AD

If your bottle's tip isn't fine enough, consider transferring your e-liquid to a smaller bottle or using a glass dropper to make filling easier and less messy.

Filling Your Suorin Drop Pod

With your coil primed and e-liquid at the ready, you're now ready to fill your Suorin Drop pod.

Tilt your Suorin Drop to expose the filling port, and use the needle tip or dropper to gently fill the pod with your chosen e-liquid. Be careful not to overfill, as this can cause leaks and impact the device's performance.

AD

Filling the Right Amount

The Suorin Drop pod has a 2ml capacity. Aim to fill it to about 80-90% of its capacity, leaving some space for expansion and to prevent leaks. This typically amounts to around 1.8-1.9ml of e-liquid.

To gauge the level, you can keep an eye on the viewing window on the side of the pod. Once you've reached the desired level, tilt the device upright and return the mouthpiece to its original position.

Checking for Leaks

Gently press the fire button once or twice to check for any leaks. If there are no leaks, your Suorin Drop is now ready to vape.

AD

If you notice any leaks, double-check that you haven't overfilled the pod, and if necessary, remove some e-liquid. Allow the device to sit upright to let any excess liquid drain before using it again.

Now that you've mastered the art of filling your Suorin Drop, you're ready to enjoy its smooth, satisfying vaping experience. Happy vaping!

AD