Mastering Your Bissell Proheat 2X: A Step-by-Step Guide on How to Fill
The Bissell ProHeat is a powerful, compact carpet cleaner, designed to provide deep cleaning and refreshing for your home. However, to ensure it performs at its best, it's crucial to know how to fill and maintain it correctly. This guide will walk you through the process, helping you get the most out of your Bissell ProHeat.
Before we dive into the process, ensure that you have both the Bissell ProHeat carpet cleaner and a suitable cleaning solution. Bissell offers a range of cleaning products specifically designed for their machines, but other branded solutions can also be used.
The Pre-Fill Process
The first step in filling your Bissell ProHeat is preparing both the machine and the cleaning solution.
Always check for any visible debris or pet hair on your carpet before cleaning. Using the machine'sCrevice Tool or Hard Surface Brush, lightly brush away any chunks or loose dirt to prevent clogging during the cleaning process.
Choosing the Right Solution
Using the correct cleaning solution is vital for an effective clean and to protect your carpet. For general cleans, Bissell's Deep Cleaning Formula or Pet Stain & Odor Remover are excellent choices. Always ensure that the solution you use is suitable for your carpet type.
To make the filling process simpler, Bissell offers Cleaning Solutions Pacs that contain both the cleaner and Water Heater Serum. The Water Heater Serum helps maintain the machine's heating system, ensuring optimal performance.
Filling the Machine
Once you've chosen the right solution, it's time to fill your Bissell ProHeat. First, unfold the Telescopic Handle and lock it into place. Then, remove the Cleaning Tank from the machine by gripping the handle and lifting it straight up. The tank is designed to lift out easily for your convenience.
Open the lid of the Cleaning Tank and carefully pour the cleaning solution into the designated area. For store-bought solutions, pour in the recommended amount, usually around 1-2 ounces per 2 gallons of water. If using Bissell's Cleaning Solutions Pacs, simply drop the pac into the tank and allow it to dissolve fully before proceeding.
The Post-Fill Process
Now that the cleaning solution is in the tank, let's prepare the machine for use.
Replace the Cleaning Tank onto the machine, ensuring it clicks into place firmly. Check that the machine is locked into the Carpet Mode by lifting and lowering the handle. If there's no resistance, your machine is ready for use.
Priming the Machine
Before using the machine for the first time, or if it's been stored for some time, it's essential to prime the pump. This helps ensure that cleaning solution reaches both the carpet and the heater system.
To prime the pump, plug in the machine and ensure the power button is switched off. Squeeze the Trigger several times until you see cleaning solution emerging from both the stain trapper tool and the heater nozzle. Once this occurs, the machine is ready to use.
Rinsing and Storing
After cleaning, it's crucial to rinse the machine thoroughly to remove any remaining residue. Refill the Cleaning Tank with water and pour it into the machine. Run the machine over your carpet as you would during a regular clean, allowing the water to circulate.
Once you've finished rinsing, empty the Cleaning Tank completely and allow it to air dry. Store the tank, along with the rest of the machine, in a cool, dry place. Always ensure that the machine is unplugged when not in use, and never store it with the power cord coiled around it.
Regularly cleaning your Bissell ProHeat and following these guidelines will help extend its lifespan and maintain its performance, ensuring your home stays fresh and clean. Happy vacuuming!