how to fill and bleed a floor jack

Mastering Floor Jack Usage: Step-by-Step Bleeding & Filling Guide

By Ashley Harris
AD

Filling and bleeding a floor jack is an essential task to ensure your jack remains reliable for lifting vehicles safely. It's a straightforward process that requires only a few tools and some patience. Let's dive into step-by-step instructions to help you master this task.

Before we begin, gather your tools: a floor jack, a tire pressure gauge, a lubricant, and a funnel. Also, ensure you have a power bleeding system for easy and quick bleeding. The process may vary slightly depending on your specific jack model, but these steps will provide a general guide.

Preparing to Fill the Floor Jack

The first step involves removing any air from the jack's chamber to make space for the new oil. Most floor jacks require about 12 to 16 ounces of oil. Check your jack's manual for the recommended amount.

AD
How to Fill and Bleed a Floor Jack
How to Fill and Bleed a Floor Jack
How To Fill And Bleed A Hydraulic Floor Jack (Purge Air)
How To Fill And Bleed A Hydraulic Floor Jack (Purge Air)
How to fill and bleed a hydraulic floor jack
How to fill and bleed a hydraulic floor jack

Carefully loosen the fill plug located at the bottom of the jack. Support the jack with a stand or a piece of wood to prevent it from tipping over while releasing the air. Slowly turn the handle clockwise to lower the saddle until it's fully extended.

Draining the Old Oil

Position the jack so that the fill plug is directly beneath a drain pan. Using a wrench, completely unscrew and remove the plug. Allow the old oil to drain entirely. This step is crucial; it ensures that you're introducing fresh oil into the system and reduces the risk of contamination or damage to the jack.

How to Repair a Floor Jack
How to Repair a Floor Jack
The final bleed - how to completely purge/bleed the air and refill your jack
The final bleed - how to completely purge/bleed the air and refill your jack

Once all the oil has drained, use a cloth or a brush to clean the area around the fill plug to prevent any debris from entering the jack during refill.

Filling the Jack with New Oil

Open the oil bottle and check that you're using the correct type. Most floor jacks require SAE 10 or 20 weight gear oil. Using the funnel, slowly pour the oil into the jack until the oil visibly starts to leak out of the bleed screw.

AD

Tighten the fill plug hand-tight only. Remember, over-tightening can cause damage to the O-ring and the plug.

Bleeding the Floor Jack

Bleeding a floor jack removes any trapped air, ensuring smooth operation and maximum efficiency. Using a power bleeding system can make this task much easier and quicker. If you don't have one, you can also bleed the jack manually.

Position the jack securely on a level, stable surface. Ensure the bleed screw is easily accessible.

AD

Manual Bleeding

Slowly pump the jack handle several times until oil begins to appear at the bleed screw. Using a box-end wrench, open the bleed screw about 1/4 of a turn. Allow oil to flow until the stream becomes steady. Pump the handle several more times, then recheck the bleed screw. Repeat this process until no more air bubbles appear in the oil.

Tighten the bleed screw firmly, but avoid overtightening. Remove the jack from its support, and it's ready for use.

Bleeding Using a Power Bleeding System

Connect the power bleeding system's hose to the bleed nipple on your jack. Place the other end of the hose in a clear container that can hold at least 16 ounces of oil. Pump the jack's handle several times until oil appears in the container. Allow the oil to flow until the stream becomes steady, indicating that all the air has been purged.

AD

Once the air is fully removed, tighten the bleed screw and disconnect the power bleeding system. Your jack is now ready for use, ensuring safety and reliability when lifting vehicles.

Regularly checking and maintaining your floor jack is paramount for your safety and the longevity of your jack. Filling and bleeding your jack should be part of your regular maintenance routine. Happy wrenching!

AD