How to Factory Reset Hikvision NVR
Facing issues with your Hikvision NVR? A factory reset can sometimes be the best solution to troubleshoot recurring problems. Here's a step-by-step guide on how to factory reset your Hikvision NVR, ensuring your device is performing at its best.
Remember, a factory reset will bring your NVR back to its default settings and erase all existing data, including users, recording schedules, and events. Back up any crucial data before proceeding.
Accessing the NVR's Web Interface
To start the reset process, you'll first need to access your NVR's web interface. Open your preferred web browser and type your NVR's IP address in the address bar. If you're unsure about the IP address, consult the device's network settings.
Once you've accessed the web interface, log in using your administrator username and password. If you've changed these credentials, use the defaults: Username -/admin, Password - 12345.
Resetting the NVR Through the Web Interface
The web interface offers a straightforward way to reset your NVR to its factory settings. Here's how:
① In the control panel, click on "Setup" in the navigation menu.
② Under "System," select "Restore & Update."
③ Click on the "Factory Setup" tab.
④ Select "Yes" in the confirmation box that appears, then click "OK."
Resetting the NVR Using the Local Display
Another method is to reset the NVR using the local display. This can be useful if you're unable to access the web interface. Here's how:
① Connect a monitor or TV to your NVR using an HDMI cable if you haven't already.
② Once the display is connected, press the "MENU" button on the NVR's front panel.
③ Navigate to "Setup," then go to "System" > "Restore & Update."
④ Click on "Factory Setup," confirm the action, and click "OK."
Verifying the Reset and Setting Up Your NVR
After completing the reset, your NVR will reboot, and the default settings will be restored. Once it's back online, verify that the reset was successful by checking the device's default IP address and other settings.
After verifying, you can start setting up your NVR again, ensuring to create secure administrator credentials and adjust other settings according to your needs.
Reconnecting Cameras and Configuring Settings
Following the reset, you'll need to reconnect your IP cameras to the NVR. This involves manually adding each camera, inputting their IP addresses or using the QR code scanning feature for easier configuration.
Don't forget to reconfigure your recording schedules, alarm settings, and other important parameters post-reset. Remember to save your settings to avoid losing them during subsequent reboots.
That's it! You've successfully factory reset your Hikvision NVR. This process should help resolve connectivity issues or other problems you might have been experiencing. Should you encounter further difficulties, don't hesitate to reach out to Hikvision's customer support for professional assistance.