Keurig 2.0: How to Drain Water for Storage
Has your Keurig 2.0 coffee maker served its purpose for the season, and you are planning to store it away temporarily? Emptying the water from your Keurig 2.0 is a crucial step in the storage process to prevent mold and bacterial growth, as well as potential water damage. So, let's dive into this simple yet vital process with these comprehensive steps.
Before you begin, ensure your Keurig 2.0 is turned off and has cooled down to avoid any potential burns. Also, keep your owner's manual handy for any model-specific instructions, although the process is primarily similar across all Keurig 2.0 models.
Draining the Reservoir
The first step in emptying your Keurig 2.0 is to drain the water reservoir. This is where the majority of the water in your machine sits.
1. Lift and remove: Begin by lifting the handle at the top of the water reservoir to remove it from the machine. As you lift, you should feel the reservoir slide out effortlessly.
Emptying the Reservoir
Once the reservoir is fully removed, you should see all the water inside. To empty this, simply pour it out into your sink.
2. Rinse and dry: After emptying, rinse the reservoir with fresh water and allow it to air dry completely before storing. This step is essential to remove any coffee residue or grim that has accumulated during use.
Draining the Internal Tank
The internal tank in your Keurig 2.0 holds additional water that isn't immediately visible. It's crucial to drain this area as well to prevent water-related issues during storage.
3. Locate the drain button: On most Keurig 2.0 models, you'll find a 'drain' or 'water drain' button located on the control panel. Consult your owner's manual if you're unsure about its location in your specific model.
4. Purge the system: Press and hold the drain button for about 7-10 seconds. This should release any remaining water from the internal tank into the drip tray at the bottom of your machine. Once finished, empty the drip tray just like you would after brewing a cup of coffee.
Descaling and Cleaning
To further prep your Keurig 2.0 for storage, performing a descaling cycle can help remove any mineral buildup and keep your machine in optimal condition.
1. Prepare the descaling solution: Mix equal parts white vinegar and water in a container. Vinegar is a natural and effective descaling agent, making it an ideal eco-friendly choice for this purpose.
Running the Descaling Cycle
2. Fill the reservoir: Pour the descaling solution into the water reservoir you previously emptied and cleaned.
3. Place a mug: Position a large, empty mug on the brew platform to collect the compañías. Using a mug with a wide opening can help prevent any overflow.
4. Start the descale cycle: Engage your machine's descaling cycle according to your model's instructions. Typically, this involves selecting the 'descale' or 'clean' option on the control panel and following the prompts.
5. Rinse and clean: Once the descaling cycle is complete, discard the vinegar solution, rinse the reservoir thoroughly, and run several fresh water cycles to flush out any remaining vinegar taste.
Final Clean and Storage
After descaling, give your Keurig 2.0 one last clean to ensure it's in top shape for when you'll be using it again.
6. Clean the exterior: Using a soft, damp cloth, gently wipe down the exterior of your machine, paying special attention to any buttons or crevices where dirt or residue may have accumulated.
7. Store in a cool, dry place: With your Keurig 2.0 clean and dry, store it in a cool, dry area away from direct sunlight and heat sources. A pantry or closet would be an ideal location.
And there you have it - a comprehensive guide on how to empty water from your Keurig 2.0 before storing it. By following these steps, you can help extend the life of your coffee maker and ensure it's ready to use when you need your next cup. Happy storing, and happy coffeemaking!