how to drain oil from craftsman lawn mower

Step-by-Step: How to Drain Oil from Your Craftsman Lawn Mower

By Melissa Thompson
AD

Understanding how to drain oil from your Craftsman lawn mower is an essential part of routine maintenance. Keeping your mower's engine well-oiled ensures its smooth operation and longevity. Here's a comprehensive guide on how to perform this simple yet crucial task safely and effectively.

Before you begin, ensure that your mower is on a level surface and has been turned off for at least 30 minutes to allow the oil to settle. This will prevent any hot oil from causing injuries and ensure accurate oil level reading.

Preparing Your Craftsman Lawn Mower for Oil Drainage

Before you drain the oil, there are a few preparations you need to make to ensure the process goes smoothly.

AD
How to Drain Excess Oil From Lawn Mower | Describe in 4 Steps (2026)
How to Drain Excess Oil From Lawn Mower | Describe in 4 Steps (2026)
How to Drain Lawn Mower Oil Without Making a Mess (Video) - Today's Homeowner
How to Drain Lawn Mower Oil Without Making a Mess (Video) - Today's Homeowner
How to Change the Oil in a Craftsman Lawnmower
How to Change the Oil in a Craftsman Lawnmower

First, locate the oil fill tube on your Craftsman mower's engine. It's usually found on top of the engine, near the air filter. The oil level is checked from here, so knowing its location will help you later when it's time to refill the oil.

Gathering the Required Tools

To drain the oil from your Craftsman lawn mower, you'll need the following tools:

Effects Of Too Much Oil In A Lawn Mower And Possible Remedies
Effects Of Too Much Oil In A Lawn Mower And Possible Remedies
  • An oil filter wrench
  • A wrench that matches the drain plug size (usually 13/16" or 21mm)
  • An oil catch pan
  • Rags or shop towels to clean up any spills
  • New oil filter and suitable engine oil (consult your owner's manual for the specifications)

Positioning Your Mower

Position your mower so that the oil pan is easily accessible and can drain oil freely. If your mower is riding, set the parking brake and tip it onto its side, ensuring the oil pan is facing downwards. If it's a push mower, lay it on its side on a stable surface.

Draining the Oil from Your Craftsman Lawn Mower

Now that your mower is prepared, it's time to drain the oil. The process is straightforward and can be completed with minimal effort.

AD

First, locate the oil pan at the bottom of the engine. The oil pan is usually round and has the oil drain plug at the bottom. Place your oil catch pan underneath the oil pan to collect the oil.

Removing the Oil Drain Plug

Using your wrench, slowly loosen the oil drain plug by turning it counterclockwise. Be careful not to overtighten as this can damage the drainage hole. Once the plug is loose, allow the oil to drain completely into the catch pan. This may take a few minutes, so be patient.

While the oil is draining, you can use this time to remove the oil filter. Using the oil filter wrench, turn the filter counterclockwise to loosen and removes it. If it's too tight, you can use a strap wrench or a large adjustable wrench. If the filter is too old or broken, you may need to saw off the top and clean the area before replacing it.

AD

Cleaning the Oil Drain Area

Once all the oil has drained, wipe the oil drain area clean using rags or shop towels to remove any residue or debris. This will prevent any contamination of the new oil and ensure a proper seal when replacing the oil drain plug.

Inspect the oil drain plug and its washer. If they're in good condition, clean them and prepare to replace them. If the washer is damaged, replace it before re-installing the plug.

Re-installing the Oil Drain Plug

Reinstall the oil drain plug by hand, turning it clockwise until it's snug. Be careful not to overtighten, as this can cause the drain plug to strip or crack, leading to oil leaks. The exact torque specifications can be found in your owner's manual.

AD

Allow the plug to sit for a few minutes to ensure any remaining oil in the engine has drained. Then, use your wrench to tighten the plug an additional ¼ to ½ turn. This is known as the "finger tight" method and helps ensure a proper seal.

Replacing the Oil Filter

Before installing the new oil filter, smear a small amount of new engine oil around the rubber gasket. This creates a better seal and makes it easier to remove the filter during future oil changes.

Screw on the new oil filter by hand, turning it clockwise until it's snug. Again, be careful not to overtighten. Tighten an additional ¼ to ½ turn, then back off about ¼ turn to ensure a proper seal.

Refilling the Engine Oil

Now that the oil drain plug and oil filter are replaced, it's time to refill your Craftsman lawn mower with fresh engine oil. Refer to your owner's manual to determine the correct type and amount of oil required for your specific mower model.

Using a funnel, pour the correct amount of oil into the oil fill tube. Allow the oil to settle for a few minutes, then check the oil level using the dipstick located near the oil fill tube. Adjust the oil level if necessary.

Final Checks

After refilling the oil, start the engine and let it run for a few minutes, allowing the new oil to circulate. Check for any leaks around the oil drain plug and oil filter. Turn off the engine and allow it to cool before rechecking the oil level. If everything looks good, it's time to put your mower back to work.

Regular oil changes are crucial for maintaining your Craftsman lawn mower's engine performance and longevity. By learning how to drain and replace the oil, you're taking a significant step towards preserving your mower's health. So, get out there and give your lawn that signature Craftsman cut!

AD