How to Drain & Store Your Keurig: A Simple Guide
Draining your Keurig coffee maker occasionally is crucial for maintaining its performance and longevity. Accumulated coffee oils and calcium deposits from your water can build up over time, affecting the taste of your brew and even clogging the machine. This comprehensive guide will walk you through the process of draining your Keurig for storage or regular cleaning.
Before you begin, gather the necessary materials: dish soap, white vinegar, a large mug or empty carafe, paper towels, and a clean cloth. The entire process should take around 30 minutes, including runtime. Let's dive right in.
Preparing Your Keurig for Draining
Before you start, make sure your Keurig is turned off and unplugged. Remove the water reservoir and discard any water inside. Next, remove the drip tray and K-Cup holder to expose the needle and pod piercer.
Wipe the area around the needle and piercer with a damp cloth to remove any coffee grounds or debris. Be careful not to push the needle or piercer back into the machine while cleaning.
Descaling Your Keurig
Descaling removes mineral deposits from your Keurig using a mixture of white vinegar and water. Fill the reservoir with half water and half white vinegar. Place a large mug or empty carafe on the drip tray to catch the mixture.
Put the reservoir back into place and turn on your Keurig. Select the largest brew size and run the vinegar mixture through the machine. After the first brew cycle, stop the machine, discard the content in the mug, refill the reservoir, and repeat the process until the reservoir is empty.
Cleaning the Needle and Piercer
While the descaling process is ongoing, you can clean the needle and piercer using dish soap and water. Soak a cotton swab or a small brush in dish soap, water, and gently scrub the needle and piercer to remove any buildup. Be sure not to bend or damage the parts.
Rinse the needle and piercer thoroughly with clean water and wipe them dry with a clean cloth. Reassemble the K-Cup holder, piercer, and drip tray.
Main Draining Process
Now that your Keurig is descaled and the needle and piercer are clean, it's time to drain the remaining water from the machine. Fill the reservoir with clean water and place a mug or carafe on the drip tray.
Turn on your Keurig and run the water through it using the largest brew size. Repeat this process until the reservoir is empty. Wipe up any water spills or drips around the machine with a damp cloth.
Final Rinse
To ensure there's no residue left in the machine, mix a tablespoon of dish soap with water in the reservoir. Run this mixture through your Keurig using the same process as before. Remember to rinse the water reservoir and mug or carafe after.
Once done, clean the exterior of your Keurig with a damp cloth to remove any coffee stains or smudges. Make sure the machine is completely dry before storing or using it again.
Draining your Keurig regularly keeps it in top shape and ensures your coffee tastes great. Make this a monthly habit for best results. Happy brewing!