how to drain gas from snowblower

Step-by-Step: How to Drain Gas from Your Snowblower

By Jessica Thompson
AD

Snowblowers are invaluable tools during snowy months, keeping your paths and driveways clear and safe. However, like any machine, they require maintenance. One crucial task is draining gas from your snowblower before storing it for the off-season. This prevents old gas from gumming up the carburetor and causing starting issues next winter. Let's dive into a step-by-step guide on how to drain gas from your snowblower.

Before proceeding, ensure your snowblower is cold to prevent any risk of fire or injury. Also, have a fuel-safe container ready to store the drained gas. You may use this for your lawnmower or other small engines. Now, let's gets started.

Preparing Your Snowblower for Draining

Start by running your snowblower until the gas tank is nearly empty. This reduces the amount of gas you'll need to deal with. Then, allow the engine to cool down completely to ensure safety during the fuel draining process.

AD
How To Drain Gas From Snowblower The Easy Way
How To Drain Gas From Snowblower The Easy Way
Step By Step Guide On How To Drain Gas From Snowblower
Step By Step Guide On How To Drain Gas From Snowblower
Learn How to Drain Gas from Snowblower with 6 Effective Instructions
Learn How to Drain Gas from Snowblower with 6 Effective Instructions

Next, find the gas cap on your snowblower, usually located on the top of the machine. You may need to consult your owner's manual if you're unsure about its location. Some snowblowers might have a Primer Bulb next to the gas cap. If yours does, squeeze it gently a few times to help empty any remaining gas in the carburetor.

Locating and Removing the Gas Cap

Once you've located the gas cap, unscrew it and remove it from the tank. Be careful not to lose the small O-ring or washer that comes with the cap, as they're essential for creating a tight seal when you reinstall the cap.

How to Drain Gas from Snowblower? - Step-By-Step Guide
How to Drain Gas from Snowblower? - Step-By-Step Guide
a man using a snow blower to clear the snow
a man using a snow blower to clear the snow

If your snowblower has a brass or copper fitting near the gas cap, like a petcock or fuel valve, you'll need to open it to drain the gas. Turn the valve counterclockwise until it's fully open. If there's no such valve, proceed to the next step.

Draining the Gas

If your snowblower has a removable gas tank, unscrew the tank from its mount and tilt it to allow the gas to drain into your fuel-safe container. If your snowblower has an integrated tank, tip the machine so the drain hole at the lowest point of the tank faces downward, allowing the gas to drain out.

AD

Keep tilting and rotating the machine until no more gas comes out. It might take a few minutes for the gas to completely drain, so be patient and thorough. Once finished, wipe any spilled gas from the snowblower with a clean cloth or paper towel to prevent fires.

Ridding Your Snowblower of Remaining Gas smells

With the gas tank emptied, you'll still notice a strong fuel smell around your snowblower. To eliminate this, follow these steps:

trace the fuel line from the gas tank to the carburetor. There should be a small, black venture tube attached to the carburetor's bottom inlet. Remove this tube by unscrewing its retaining clip and pulling it out.

AD

Clearing the Carburetor

With the venture tube removed, prime the carburetor by squeezing the primer bulb a few times. This forces fresh air into the carburetor, pushing out any remaining gas. If you don't have a primer bulb, use a small screwdriver to gently plug the fuel inlet hole on the carburetor, then spray some starting fluid into the air intake. Pull the starter cord several times to clear the carburetor.

After clearing the carburetor, reattach the venture tube and ensure all parts are properly sealed. Now your snowblower is ready for storage, free of old gas and fuel smells, and prepared for next winter's usage.

Storing Your Snowblower

Before storing your snowblower, give it a thorough cleaning to remove any dirt, salt, or other debris that could accelerate wear or cause damage. Once cleaned, store it in a dry place, preferably with the intake facing up to prevent water from collecting inside.

AD

And there you have it! By following these steps, you've successfully drained gas from your snowblower and prepared it for off-season storage. Regular maintenance like this ensures your snowblower is always ready when winter strikes, keeping your paths clear and your mind at ease.

AD