how to drain gas from a snowblower

How to Drain Gas From a Snowblower

By Laura Taylor
AD

Winter's icy grip can be challenging, but with the right tools, you can master the snow. Snowblowers are lifesavers during heavy snowfall, but they rely on gas to power through the frost. Over time, old gas can damage your snowblower's engine. So, learning how to drain gas from your snowblower is crucial for its longevity and performance. Let's dive into the process, ensuring your snowblower is ready for next winter.

Before we begin, safety is paramount. Always ensure your snowblower is cool and has been turned off for at least 30 minutes to prevent any accidents. Wear gloves to protect your hands from the cold and any fuel spills. Now, let's get started.

Preparing Your Snowblower for Gas Draining

Preparation is key to a smooth gas draining process. Begin by finding a suitable, well-ventilated area to work in, preferably a flat surface like your garage or driveway. This will make the process easier and safer. Next, gather your equipment. You'll need a siphon pump or a turkey baster, a gas can, and a funnel.

AD
How To Drain Gas From Snowblower The Easy Way
How To Drain Gas From Snowblower The Easy Way
Step By Step Guide On How To Drain Gas From Snowblower
Step By Step Guide On How To Drain Gas From Snowblower
Learn How to Drain Gas from Snowblower with 6 Effective Instructions
Learn How to Drain Gas from Snowblower with 6 Effective Instructions

Before proceding, locate your snowblower's fuel shutoff valve. This is usually on the side of the engine near the gas cap. Turn the valve to the 'Off' position to prevent gas from draining while you're working on it.

Draining Gas Using a Siphon Pump

A siphon pump is the easiest and safest way to drain gas from your snowblower. Start by sliding the siphon pump's tube into the gas tank through the gas cap opening. Ensure the tube reaches the bottom of the tank to drain all the gas.

How to Drain Gas from Snowblower? - Step-By-Step Guide
How to Drain Gas from Snowblower? - Step-By-Step Guide
a man using a snow blower to clear the snow
a man using a snow blower to clear the snow

Prime the siphon pump by squeezing the bulb several times to create suction. Once primed, place the other end of the tube into your gas can. Release the bulb to start the siphoning process. The gas will be transferred into the can. Keep an eye on the process to avoid overflowing the can.

Draining Gas Using a Turkey Baster

If you don't have a siphon pump, a turkey baster can be an alternative, albeit more labor-intensive, method. Remove the gas cap and submerge the turkey baster into the gas tank. Suck up as much gas as the baster can hold, then squeeze the contents into your gas can. Repeat this process until all the gas is drained.

AD

This method takes longer than using a siphon pump, so be patient and ensure you're working in a safe, comfortable environment. Also, avoid inhaling any fumes and be mindful of splashes.

Residual Fuel and Winterization

After draining the majority of the gas, additional fuel might remain in the fuel lines and carburetor. To remove these residual fuels, you'll need to run your snowblower until it stalls. Here's how:

With the fuel shutoff valve still in the 'Off' position, pull the snowblower's starter cord several times to expel residual fuel. Once the engine stalls, turn the valve back to the 'On' position and repeat the process. Continue until the snowblower no longer pulls or stalls, indicating that all residual fuel has been expelled.

AD

Adding Stabilizer and Storing Your Snowblower

To keep your snowblower running smoothly next winter, add a fuel stabilizer to the fresh gas you've just put in the tank. Run the engine for a few minutes to circulate the stabilizer throughout the fuel system. Turn off the engine and replace the gas cap.

Finally, store your snowblower in a cool, dry place, preferably on a hard surface. A garage is ideal, but if you must store it outside, use a snowblower cover to protect it from the elements. Regular maintenance and proper storage ensure your snowblower is ready to tackle next winter's snowfall.

Mastering how to drain gas from your snowblower ensures your machine is ready for the off-season and primed for the next winter. Regular maintenance practices like this extend the life of your snowblower, saving you time and money in the long run. So, next time winter rolls around, you'll be ready, with a well-maintained snowblower and a clear pathway to your front door. Happy snowblowing!

AD
AD