how to drain bestway power steel pool

How to Drain a Bestway Power Steel Pool

By David Garcia
AD

Draining your Bestway Power Steel frame pool at the end of the season or due to maintenance needs doesn't have to be a daunting task. With the right steps and techniques, you can safely and efficiently empty your pool, ensuring its longevity and future use. Let's dive into the process of draining your Bestway Power Steel pool.

Before you begin, gather all necessary equipment: a submersible pump, a garden hose, and if needed, a sump pump, depending on the drainage layout in your backyard. Also, make sure to have a properly measured foundation for your pool, which can help in swift drainage and keep the pool's liner safe.

Preparing for Drainage

1. **Drain the Initial Depth:** Start by draining your pool to an initial depth that allows safe interaction with the pool water. This typically means draining the pool to about four to five feet of water.

AD
Different Ways On How To Drain Above Ground Pools
Different Ways On How To Drain Above Ground Pools
How to Install an Above Ground Swimming Pool
How to Install an Above Ground Swimming Pool
Your Built-In Pool Drain is Useless, Try This
Your Built-In Pool Drain is Useless, Try This

2. **Turn Off the Filter System:** Ensure your filter system is turned off. This helps prevent accidental activation while you're working and ensures no air is drawn into the pump, which could damage it.

Choosing the Right Pump

Draining your Bestway Power Steel pool requires the right pump. Here's how to choose one:

How to DRAIN an ABOVE GROUND POOL (Even Without A Pump)
How to DRAIN an ABOVE GROUND POOL (Even Without A Pump)
Home Tips With Jim: Draining the Pool
Home Tips With Jim: Draining the Pool

1. **Consider the Pool's Size:** Submersible pumps with higher horsepower are typically needed for larger pools. They'll be able to handle the increased volume of water.

2. **Check the Pump's Capacity:** Ensure the pump's capacity matches your pool's size. A pump's flow rate should be around 25 gallons per minute to effectively drain a standard-sized pool.

AD

Setting Up the Pump

1. **Attach the Hose:** Connect a garden hose to the discharge of the submersible pump. This hose will direct water away from the pool area.

2. **Place the Pump:** Carefully lower the pump into the pool, making sure it's fully submerged and secure. Place it near the pool's edge for easy access.

Draining the Pool Completely

With the pump and hose set up, you're ready to drain your pool completely. Remember, never drain your pool below the skimmer's level, as this could damage the skimmer. Always leave a little water in the pool to protect the skimmer.

AD

Continuous Draining

1. **Monitor the Drainage:** Keep an eye on the pump and hose to ensure everything is working smoothly. If the flow slows down significantly, it may be time to relocate the pump to a deeper part of the pool.

2. **Empty the Pool Completely:** Depending on your pool's size, it may take several hours to drain completely. Be patient and ensure the pool is emptied safely.

Final Cleanup

1. **Remove the Pool Liner:** Once the pool is empty, carefully remove the pool liner, keeping it clean and dry to prevent damage during storage.

AD

2. **Clean and Store the Equipment:** Thoroughly clean the submersible pump, garden hose, and other equipment, then store them properly for future use.

And there you have it! Your Bestway Power Steel pool is drained, cleaned, and ready for storage. Season after season, following these steps will help you maintain your pool and ensure its longevity. Now, you can look forward to the next swimming season with peace of mind.

AD