Mastering Godet Drafting: A Comprehensive Guide
Drafting a godet, a modular all-purpose sleeve used for a variety of materials, is a skill that every seamstress and tailor should master. This guide will walk you through the process, from understanding the pattern to sewing the final godet, ensuring your clients' clothes fit perfectly and look fantastic.
Before we dive into the process, let's ensure you have the necessary tools and materials. You'll need your pattern, a fabric matching the garment you'll be adding the godet to, a sharp pencil, scissors, pins, a seam ripper, a sewing machine with a universal needle, and all-purpose polyester thread.
Understanding the Godet Pattern
The godet pattern is essentially a triangle or a parallelogram, depending on the fit you're aiming for. The base of the triangle determines the width of the hem, while the height dictates the depth of the godet. Understanding this will help you manipulate the pattern to fit your specific needs.
For a simple triangle godet, the pattern will be a right-angled triangle. For a more subtle, less noticeable fullness, you might use a parallelogram-shaped godet, where both ends are the same width but not necessarily the same length.
Adjusting the Godet Pattern
Before cutting your fabric, you might need to adjust your godet pattern. To add fullness to a garment, you'll typically make the godet wider. However, be mindful not to make it too wide, as this can look unbalanced. Conversely, to add less fullness, you can make the godet narrower.
You can also adjust the depth of the godet. Remember, a deeper godet will add more fullness. However, use caution as a godet that's too deep can look unflattering or even affect the garment's construction.
Cutting the Godet
Once you've adjusted your pattern, it's time to cut your godet. Lay your fabric flat, smooth out any wrinkles, and place your pattern piece on the fold for a symmetrical godet.
Pin the pattern in place, ensuring the pins are perpendicular to the fabric. Carefully cut around the pattern, keeping your scissors perpendicular to the fabric for a clean edge. Unfold the fabric and check that your godet is the correct size and shape.
Sewing the Godet
Before sewing, iron the godet to create a smooth, crease-free edge. Put the godet right side up and fold the edge over, pressing it in place. This will create the seam allowance and help with sewing.
Place the godet on the garment where you want to insert it. Pin the folded edge in place, ensuring the pins are vertical to the garment's grainline. Machine stitch along the pinned edge, removing pins as you go.
Finishing the Hem
Once you've stitched the godet in place, press the hem allowance again. Fold the hem allowance over the stitched edge and press it in place. Topstitch along the edge, catching the hem allowance in your stitches. This will prevent the godet from shifting or turning out.
For a clean finish, you can understitch the hem by stitching from the inside of the garment just above the godet, catching the hem allowance as you go. This helps keep the hem flattened to the godet.
Trimming and Clipping
To prevent the godet from puckering or showing on the right side of the garment, carefully trim the seam allowance, being mindful not to trim through to the right side of the fabric. Also, clip into the seam allowance at the inner corner of the godet.
Press the seam allowance away from the godet and your garment is ready to wear. The godet should add the perfect amount of fullness, flattering your client's figure.
Now that you know how to draft and sew a godet, you're equipped to add that perfect touch of fullness to any garment. Practice makes perfect, so don't hesitate to try, fail, and try again. Happy sewing!