how to dismantle ikea drawers

How to Dismantle IKEA Drawers: A Step-by-Step Guide

By David Brown
AD

Ever found yourself in a pickle with those pesky IKEA drawers? We've all been there - they're compact, stylish, and affordable, but dismantling them can feel like solving a puzzle. Don't fret, though. We've got you covered with this step-by-step guide on how to dismantle IKEA drawers like a pro.

Before we dive in, remember that most IKEA furniture uses a similar assembly method. However, always double-check your specific furniture's instructions. Safety first! Now, let's get started.

Preparation and Tools

First things first, gather your tools. For dismantling IKEA drawers, you'll typically need a flat head screwdriver, a hammer (for stubborn pieces), and maybe some gloves for protection. Also, ensure you're working in a spacious, well-lit area to avoid any unsightly accidents.

AD
The Easy Fix For Broken IKEA Drawers
The Easy Fix For Broken IKEA Drawers
How to Adjust IKEA Drawers
How to Adjust IKEA Drawers
How to open/remove/dismantle Ikea kitchen cabinet drawer front? / öffnen zerlegen Ikea Schublade?
How to open/remove/dismantle Ikea kitchen cabinet drawer front? / öffnen zerlegen Ikea Schublade?

Next, empty the drawers. Remove all the contents and set them aside to give you ample room to work. It's also a good idea to put your old drawer disassemble kit (the one that came with your furniture) somewhere safe, just in case you need to reassemble the drawers later.

Unscrew and Remove the Front Panel

IKEA drawers often have a simple screw-and-hinge mechanism for the front panel. Using your flat head screwdriver, locate these screws on the inside of the drawer. They're usually at the top corners. Unscrew them gently, holding the drawer steady with your other hand. Once unscrewed, remove the panel carefully.

How we Reinforced our Ikea Drawers
How we Reinforced our Ikea Drawers
the metal bars remain fixed to the drawer until not the position of the meatbars
the metal bars remain fixed to the drawer until not the position of the meatbars

If you encounter resistance, don't force it. You might have missed a screw or the panel might still be attached via the hinges. Run your hands along the edges to ensure no screws are left. If it's still not coming off, gently tap the panel with your hammer to loosen the hinges.

Separate the Drawer Box and the Front Frame

With the front panel off, you should see the drawer box (the main part with the sides and bottom) and the front frame connected by screws. Use your screwdriver to loosen and remove these screws. Keep them in a safe place - we don't want to misplace any parts.

AD

Once unscrewed, wiggle the drawer box gently to separate it from the front frame. Again, if it's not budging, check that you've removed all the screws. If you've removed everything and it's still stuck, use your hammer to gently tap along the sides. This should help to nudge the two parts apart.

Dismantling the Inside Structure

Your IKEA drawer should now be in two main parts. However, there might be a few more parts to remove on the inside structure.

Locate the middle support, often a metal or wooden strip running down the middle. On either side of this, you'll find small tapped holes. Use your flat head screwdriver to slowly and carefully push the holes out. This should release the middle support. If it's stuck, use your hammer to give it a gentle tap.

AD

Removing the Drawer Sides

With the middle support removed, the drawer sides should now be loose. They're usually held in place with the same tap-and-hole mechanism as the middle support. Push out these holes carefully with your screwdriver. Make sure to do this on both sides.

Once loosened, gently wiggle the drawer sides to remove them. If they're still stuck, use your hammer to tap them loose. Be careful here - we don't want any unexpected projectiles!

Final Touches: Detach the Bottom Panel

Finally, remove the bottom panel. This is usually just a thin piece of plywood. It might be attached with screws or it might just be loosely placed. If it's screwed, unscrew it gently. If it's loose, simply lift it out.

AD

And there you have it! Your IKEA drawers are now fully dismantled. Whether you're moving, recycling, or just needed some extra space, we hope this guide helped. Happy dismantling!

AD