Mastering Remington: Step-by-Step Guide on Disassembling Your 870
Dismantling a Remington 870 shotgun might seem daunting at first, but with the right steps and a little patience, you can safely take your firearm apart for cleaning, maintenance, or upgrading. This comprehensive guide will walk you through the process, ensuring you maintain your Remington 870 in peak condition while honing your gun-smithing skills.
The Remington 870 is a robust, reliable shotgun known for its versatility and durability. Learning how to dismantle it is an essential aspect of responsible gun ownership. Remember, safety should always be your top priority when handling firearms. Keep your weapon unloaded, and follow all local regulations and safety guidelines.
Understanding the Remington 870 Mechanism
Before you begin, familiarize yourself with the Remington 870's main components. The shotgun consists of a receiver, barrel, stock, forearm, and various internal parts like the bolt, trigger group, and magazine tube. Understanding these components will help you navigate the disassembly process with ease.
Additionally, knowing how your Remington 870 operates will help you reassemble it correctly. The pump-action shotgun cycles by moving the fore-end back and forth, loading and ejecting shells through the action of the bolt and its components.
The Role of the Safety and Trigger Assembly
The safety and trigger assembly initiates the firing sequence. Once you pull the trigger, the hammer releases, striking the firing pin and igniting the primer of the shell. To dismantle this mechanism, you'll need to remove the trigger guard and the safety selector plate.
After securing the weapon and ensuring it's unloaded, start by unscrewing the trigger guard using an appropriate screwdriver. Next, remove the safety selector plate using a rolling pin or the rim of a cartridge. With these parts out of the way, you can safely disconnect the trigger and hammer from the frame.
Extracting the Bolt and Ejector
The bolt and ejector facilitate the feeding and cycling of the shotgun. To remove the bolt and ejector, first, withdraw the forend and gently pry the bolt release catch located behind the trigger guard. Pull the bolt out of the receiver while supporting the barrel to maintain its alignment.
With the bolt out, you can tap the ejector rod striker and the ejector itself out of their respective holes. Use a brass drift punch to drive out the ejector, and be gentle to avoid deforming the ejector or the receiver. Once the ejector is out, you can proceed to remove the magazine spring and the magazine tube.
Disassembling the Action and Magazine Tube
With the trigger group, bolt, and ejector components dismantled, it's time to focus on the action and magazine tube. Before proceeding, ensure that there are no live cartridges or empty hulls in the magazine tube. You can use a cleaning rod to gently push out any remaining debris.
The Remington 870's receiver supports a wide range of barrel lengths, from 18.5" to 30". Disassembling the action allows you to inspect the internal components for wear or damage and to perform thorough cleaning and lubing. To separate the receiver and barrel, first, loosen the sling swivel screws at the front of the receiver and remove the barrel release pin.
Removing the Barrel and Magazine Tube
With the barrel release pin extracted, you can separate the barrel and forend from the receiver. To do this, press the barrel release catch and pull the barrel forward. Once the front lug clears the receiver, gently pull the barrel away from the receiver while slowly turning it to release the recoil pad. This will allow the magazine tube to drop out.
The magazine tube holds the ammunition and feeds it into the chamber. When removing the magazine tube, you'll notice a cutout on its surface. This cutout indicates the position of the bolt stop that prevents the weapon from firing when the magazine is empty.
Completing the Disassembly
After removing the barrel and magazine tube, the last major component to dismantle is the stock. To remove the stock, first, extract the trigger group assembly. Then, carefully pry the stock from the receiver's tang. With the trigger group and stock out of the way, the only remaining parts are the internal components of the receiver, such as the hammer, sear, and disconnect.
Examine these components for wear and tear, and ensure they're clean and properly lubricated. A well-maintained Remington 870 shotgun will provide years of reliable service, and understanding its inner workings will give you the confidence to tackle any repair or upgrade tasks that come your way.
Now that you've successfully dismantled your Remington 870, take the time to clean and inspect each component, paying close attention to the pivot point of the trigger and the sear, as well as the magazine tube and follower. With proper care and regular maintenance, your Remington 870 will continue to serve you well, ensuring your shooting sessions are safe and enjoyable. When it's time to reassemble your shotgun, refer to this guide in reverse order and take your time to ensure each component is correctly seated and aligned.