how to disassemble rubbermaid shed

How to Disassemble a Rubbermaid Shed

By Melissa Harris
AD

Looking to dismantle your Rubbermaid shed to relocate it or store it for the season? Disassembling a Rubbermaid shed isn't as daunting as it might seem, with the right steps and tools. Let's dive into a comprehensive guide to help you disassemble your Rubbermaid shed with confidence.

Before you begin, make sure to gather the necessary tools and ensure you have a clear, clutter-free workspace. This will not only make the process easier but also safer. Additionally, check the weather forecast to avoid unexpected rain or snow that could hamper your progress.

Understanding Your Rubbermaid Shed

Rubbermaid sheds are modular structures, made up of panels that interlock and fasten together with bolts, nuts, and screws. Understanding this basic construction will help you navigate the disassembly process efficiently.

AD
7x7 Rubbermaid Storage Shed Assembly + Shelving
7x7 Rubbermaid Storage Shed Assembly + Shelving
an outdoor storage shed with pots and gardening equipment
an outdoor storage shed with pots and gardening equipment
How to Assemble a Rubbermaid Storage Shed
How to Assemble a Rubbermaid Storage Shed

The foundation of your shed is its main support, typically consisting of a base frame or anchored stakes. The walls, roof, and floor panels are attached to this foundation. Familiarize yourself with these components to make disassembly smoother.

Gather Your Tools

Having the right tools at hand simplifies the process. Here's a list of tools you'll need:

Stay organized all year
Stay organized all year
Rubbermaid 7x7 Roughneck Shed Time-Lapse Build
Rubbermaid 7x7 Roughneck Shed Time-Lapse Build
  • Socket wrench or ratchet with a set of sockets that match your shed's bolts and nuts
  • Drill with a screwdriver bit for removing screws (if applicable)
  • Hammer or mallet
  • Tape measure
  • Cordless drill (optional, for speeding up the removal of bolts and nuts)

Preparation: Disconnect Utilities and Organize Your Shed

Start by disconnecting any utilities connected to your shed, such as electrical circuits or water hoses. Next, organize the contents of your shed. This will make disassembly easier and help prevent damage to your belongings.

Consider the weather conditions and the time of day when you plan to work. If possible, disassemble your shed on a calm, dry day with plenty of daylight remaining. Also, ensure that you have enough space to layout the disassembled parts for easy storage or moving.

AD

Dismantling Your Rubbermaid Shed

Now that you're prepared, it's time to start disassembling your Rubbermaid shed. We'll work from the top down, starting with the roof and finishing with the foundation.

Keep in mind that each shed model can vary slightly in assembly, so always refer to your specific shed's instruction manual for detailed guidance. That being said, the general steps below will apply to most Rubbermaid sheds.

Remove the Roof Panels

Begin by removing the roof screws or bolts that secure the roof panels to the wall panels. Using a ladder for safety, climb up to the roof and start at one end, working your way across. Have a helper or a stabilizer to hold the ladder if possible.

AD

Lift the roof panels off gently after loosening all the fasteners. To prevent damage, you can lay them on a flat surface if the area around your shed allows for it. Once the roof panels are removed, set them aside carefully. You may need to stack them to keep them aligned with each other for easier reassembly later.

Disconnect the Walls

Next, move on to the wall panels. Start by removing the screws or bolts at the top of the walls. As you loosen each one, the panel should come free from the interlocking mechanism. Have a helper assist you, as the panels can be heavy and unwieldy.

Lower each wall panel to the ground, supporting it if necessary. If your shed has windows, be extra careful not to break them during the removal process. Once all the wall panels are down, step back and admire your progress. You're halfway there!

AD

Detach the Floor

Finally, it's time to remove the floor. Start by removing any debris or obstacles that might prevent the floor from lifting cleanly. As you lift it, you might feel resistance due to the interlocking mechanism. Use a gentle, side-to-side motion to release it.

Once the floor is free, lower it to the ground. You may need to tilt it to fit through any narrow openings. If your shed is anchored to the ground, make sure to undo any anchors or bolts holding the floor down.

Store or Dispose of Your Shed Components

Congratulations, your Rubbermaid shed is now completely disassembled! But your work isn't done yet. Carefully gather all the components and store them properly for reassembly or disposal.

If you're storing your shed for the season, make sure to protect the panels from weather damage, pests, and vermin. Consider labeling each piece to make reassembly easier later on. If you're disposing of your shed, check local regulations for appropriate disposal methods or consider donating it to a local charity or community center.

Now that you've successfully disassembled your Rubbermaid shed, think about where you'll store or relocate it. Perhaps you've freed up some space in your backyard for a garden, or maybe you're planning to move your shed to a new location. Whatever your plans, enjoy the sense of accomplishment that comes with a job well done!

AD