how to disassemble a cv axle

Easy Steps to Disassemble a CV Axle: A Comprehensive Guide

By Andrew Wilson
AD

Disassembling a CV (Constant Velocity) axle can be a daunting task, but with the right tools and a step-by-step guide, it's a manageable process. This article will walk you through the essential steps to help you understand how to disassemble a CV axle, ensuring you have all the necessary information for a successful operation.

Before we dive into the process, it's crucial to gather all the required tools and safety gear. You'll need a jack, jack stands, a breaker bar, a hammer, a chisel, a pry bar, and possibly a pickle fork or a CV joint separator tool. Additionally, ensure you have a safe and well-lit workspace, and always wear appropriate personal protective equipment (PPE) such as gloves and safety glasses.

Preparation and Disconnection

The first step in disassembling a CV axle involves preparing the vehicle and disconnecting the CV joint from the hub. Start by safely lifting the vehicle using a jack and securing it with jack stands. This will give you clearance to work on the CV joint.

AD
How to: Replace Axles on Audi A4, A6, A8 VW Passat, Jetta
How to: Replace Axles on Audi A4, A6, A8 VW Passat, Jetta
My redneck Benz- Replacing cv joint boot 1 of 2
My redneck Benz- Replacing cv joint boot 1 of 2
a man holding an object in his hand and the words classic mini axes above him
a man holding an object in his hand and the words classic mini axes above him

Once the vehicle is secure, locate the CV joint cover and remove it using a pry bar or a screwdriver. This cover is usually held in place by clips or screws. After removing the cover, you should see the CV joint boot and the outer CV joint itself.

Removing the Hub Nut

Using a breaker bar and a large socket, loosen and remove the hub nut. This nut is typically quite tight, so you might need to use some force. It's essential to ensure theHub nut is loose enough to spin by hand before proceeding, as excessive torque can damage the threads.

a man holding a red and black baseball bat next to a bunch of cones on a table
a man holding a red and black baseball bat next to a bunch of cones on a table
CV Axle Boot: Overview, Signs, And Replacement - Gmund Cars
CV Axle Boot: Overview, Signs, And Replacement - Gmund Cars

To remove the hub nut completely, wrap a strap wrench or a chain around the nut and use it to apply force in short bursts. This will help prevent you from stripping the threads or damaging the nut.

Separating the CV Joint

With the hub nut removed, it's time to separate the CV joint from the hub. If you have a pickle fork or a CV joint separator tool, use it to separate the joint. You may need to use a hammer and chisel to tap the tool into place and apply force evenly. Be sure not to damage the CV joint or the hub during this process.

AD

If you don't have a specialized tool, you can use a large pry bar to separate the joint. Insert the pry bar between the CV joint and the hub, and apply steady force. You may need to work at it for a few minutes to separate the joint. Be careful not to twist or bend the CV axle during this process.

Removing the Outer CV Joint

Now that the CV joint is separated from the hub, it's time to remove the outer CV joint from the axle shaft. Start by removing the CV joint boot clamps using a screwdriver or a pickle fork. These clamps are usually held in place by spring-loaded metal clips or screws.

After removing the clamps, carefully cut and remove the CV joint boot. This boot protects the CV joint from debris and wear, but it can be difficult to remove without cutting it. Use a sharp knife or scissors to carefully cut the boot away from the joint, being cautious not to damage the joint itself.

AD

Removing the Outer CV JointPierce

With the CV joint boot removed, you should see the outer CV joint's ball bearings. These bearings are held in place by a circlip (or snap ring) at the end of the axle shaft. To remove the circlip, use a pair of circlip pliers or a small flathead screwdriver to carefully push the clip out of its groove.

Once the circlip is removed, gently tap the outer CV joint out of the axle shaft using a hammer and a courteously sized darc. Be sure to support the axle shaft with a block of wood or a piece of metal to prevent damaging it. The outer CV joint should slide out of the axle shaft with relative ease.

Removing the Inner CV Joint

Now that the outer CV joint is removed, it's time to remove the inner CV joint from the transmission or differential. If the joint is rusted or seized, you may need to use a CV joint separator tool or heat the joint with a torch to expand the metal and release the joint.

AD

To remove the inner CV joint, use a breaker bar and a large socket to loosen and remove the bolts or nuts holding the joint in place. Depending on the vehicle, these bolts may be on either the transmission or the differential side of the joint. Once the bolts are removed, gently tap the inner CV joint out of the transmission or differential using a hammer and a courteously sized darc.

With the inner CV joint removed, the CV axle is completely disassembled, and you can proceed with any necessary repairs or replacement.

AD