how to disable wps on att router

Disable WPS on AT&T Router: Step-by-Step Guide

By John Johnson
AD

Do you often find your AT&T internet connection slow or unstable? Wi-Fi Protected Setup (WPS) could be the culprit. WPS is a feature that enables you to connect your devices to your router securely with just a push of a button, but it can also pose security risks. If you're looking to disable WPS on your AT&T router, you're in the right place. Let's dive into a step-by-step guide on how to do this.

Before we proceed, it's crucial to understand that turning off WPS will make connecting new devices a bit more manual. You'll need to use the traditional WPA2 or WPA3 security method, which involves entering your Wi-Fi password. Now, let's get started.

Understanding Your Router's Setup Page

To disable WPS, you'll need to access your router's setup page. Familiarizing yourself with this page will be beneficial for future configuration tasks. Here's how you can access it:

AD
How to reset router - The Tech Edvocate
How to reset router - The Tech Edvocate
How to convert an ADSL telephone modem into normal Router - LotofTech
How to convert an ADSL telephone modem into normal Router - LotofTech
How to access router settings - The Tech Edvocate
How to access router settings - The Tech Edvocate
  • Open your web browser and navigate to 192.168.1.254 (or the IP address provided by your router).
  • Log in using your router's credentials. By default, the username is 'admin' and the password is the last eight characters of your router's MAC address (located on the router's label).

Once you've successfully logged in, you'll see the router's setup page. You're now ready to proceed.

Disabling WPS in Your AT&T Router Firmware

AT&T provides several router models, each with slightly different firmware. Here's how you can disable WPS on a few common AT&T routers:

How to Extend Wi-Fi Range with Another Router
How to Extend Wi-Fi Range with Another Router
How to use router - The Tech Edvocate
How to use router - The Tech Edvocate

ARRIS BGW320

1. In the main dashboard, click on 'Security' on the left-hand side menu.

2. Under 'Wi-Fi Settings', uncheck the box next to 'Allow WPS'.

AD

NETGEAR CM1000

1. Click on 'Connectivity' on the left-hand side menu.

2. Under 'Wi-Fi', click on 'Edit'.

3. Uncheck the box next to 'Enable WPS'.

AD

Verifying WPS is Disabled

After disabling WPS, it's a good idea to verify that it's indeed off. Here's how:

On the Web Interface

1. Navigate to the WPS settings on your router's web interface (as shown above).

2. Ensure that the setting is changed to 'Off' or 'Disabled'.

AD

Using the AT&T Smart Home Manager App

1. Open the AT&T Smart Home Manager app on your smartphone.

2. Tap on your router. Then, tap on 'Wi-Fi'.

3. Tap on 'Security' and ensure that 'WPS' is turned off.

Congratulations! You've successfully disabled WPS on your AT&T router. Remember, disabling WPS might result in more manual connection processes for new devices, but it significantly enhances your network's security. Now, sit back and enjoy your safer, more stable internet connection.

AD