How to Disable Integrated Graphics in BIOS: Step-by-Step Asus Guide
Are you tired of your integrated graphics (iGPU) conflicts with your dedicated graphics card (dGPU) in your Asus laptop? Disabling the iGPU in the BIOS could resolve this issue. This process requires careful navigation through the BIOS settings. Let's guide you through the steps.
The Asus BIOS interface is intuitive, but it can still be daunting for first-timers. Don't worry; we'll break it down into simple, understandable steps. Remember, meddling with the BIOS can void your warranty and potentially damage your system if not done correctly. Proceed with caution.
Entering the Asus BIOS
Accessing the BIOS is the first step. You'll need to reboot your laptop and interrupt the boot process to enter the BIOS.
To do this, during boot up, continuously press the F2 key. If your laptop doesn't respond to the F2 key, try Esc, Del, or F10. The specific key depends on your laptop model. If you're unsure, refer to your laptop's documentation.
Navigating the Asus BIOS
Once in the BIOS, you'll see multiple menus and settings. Don't be overwhelmed; we'll guide you through the essentials.
Finding the Advanced Mode
The iGPU setting is located in the Advanced Mode of the BIOS. To get there, use the arrow keys to navigate to the 'Advanced' tab and press Enter.
Alternatively, you can use the 'Easy Mode' first. Go to 'AI Mod' and then 'GPUijon Mod'. Make sure 'GPU auto' is enabled here. Then navigate to 'Advanced Mode' to proceeds further.
Disabling the Integrated Graphics
In the Advanced Mode, use the arrow keys to navigate to the 'Chipset' or 'Video Configuration' section. The exact location might vary depending on your Asus laptop model.
Look for the 'Internal Graphics' or 'Enable IGPU' option. This could also appear as 'PEG/PLL Setting - Auto' or 'iGPU multifční mód - Zat LIKEprinted'. The specific terminology might vary, but the concept remains the same.
Using the arrow keys, change the setting to 'Disabled', 'Off', or 'Auto' (this disables the iGPU in most cases). Ensure you select the correct option by double-checking. Then, save your changes and exit the BIOS.
Finally, reboot your laptop. Upon restart, it should now boot with only your dedicated graphics card. If you encounter any issues or still see Integrated Graphics in use during Windows setup, you may need to repeat the process or consult with a professional.