How to Deflate Coleman SaluSpa
As an avid camper, there's nothing quite like the freedom of taking your inflatable hot tub with you on your adventures. But, when it's time to pack up and go, deflating your Coleman SaluSpa can seem like a daunting task. Fret not, with the right steps and a bit of patience, you can have your hot tub ready to store away in no time. Here's a comprehensive guide on how to deflate your Coleman SaluSpa, ensuring a smooth deflating process for your next camping trip.
Before you begin, ensure you have all the necessary tools to hand: your SaluSpa pump, an extension cord (if needed), and something to cover your pump while it's being stored, like a PVC pipe or an old sock. Let's dive into the deflating process.
Prepare for Deflation
Setting the stage for a smooth deflation process starts with emptying your hot tub. First, remove any accessories such as the cover, inflatable pillows, or cup holders. Then, drain all the water using the saline system's purge valve located at the bottom of the tub. If you're at a campsite without a draining option, use a submersible pump or siphon the water into a large bucket.
Once the water is fully drained, dry the inside of the tub and the detachable floor liner with a towel. This step prevents any mold or mildew from forming during storage.
Pressure Release
Before you start deflating, you need to release the air pressure inside the tub. Coleman SaluSpa tubs have an air release button located on the side of the tub. Press and hold this button to release the air slowly. You'll hear a hissing sound as the air escapes. Be careful not to release the air too quickly, as this can cause the liner to wrinkle or fold.
After releasing all the air, you can remove the top lid and start deflating the top section of the tub. To do this, insert the concomitant nozzle of your SaluSpa pump (the one with the check valve) into the inner valve located on top of the tub. Turn the pump on and let it deflate completely. You can use an extension cord if the pump's cord is not long enough.
Deflating the Bottom Section
Next, locate the outer valve on the bottom of the tub. Insert the pump's concomitant nozzle into this valve. Turn the pump on to deflate the bottom part of the tub. Be mindful of any sharp objects or debris around the deflating area to prevent any accidental punctures.
Once the bottom section is deflated, remove the pump nozzle. Now, you can deflate the remaining air in the tub manually by rolling it up tightly, starting from one side. This method will help you get as much air out as possible.
Store Your SaluSpa Correctly
A well-stored deflated SaluSpa will thank you with less hassle when you inflate it again. First, gently shake the deflated tub to dislodge any remaining water or debris. Then, carefully fold and roll the tub up, ensuring no parts are tucked into the roll. The fold lines should be faced outwards to avoid creases during inflation.
Store your deflated SaluSpa in a cool, dry place, away from direct sunlight and extreme temperatures. You can use a storage bag or wrap it in a large plastic bag to keep pests and dust at bay.
Storing the Pump
Taking care of your SaluSpa pump is equally important. Start by cleaning any remaining water or moisture from the pump using a towel. Store the pump's hose and cable in a neat, non-twisted fashion to prevent kinks and damage. Cover the pump with a protective casing or bag to keep it clean and safe until your next adventure.
Don't forget to store the wheels in a secure position to prevent them from moving around or damaging the tub during transit. You can do this by securing them with bungee cords or Velcro straps.
Congratulations! You've successfully deflated and stored your Coleman SaluSpa. Remember, proper care ensures a long life for your hot tub, ready for your next camping escapade. Safe travels!