how to cut ramp stringers

How to Cut Ramp Stringers: A Step-by-Step Guide

By Steven Jones
AD

Cutting ramp stringers, a crucial aspect of staircase construction, requires careful planning and precise execution to ensure safety and longevity. This guide will walk you through the process, from choosing the right tools to the final cuts, ensuring your diagonals and support are solid and secure.

Whether you're a DIY enthusiast or a professional contractor, understanding how to cut ramp stringers is an essential skill. By following best practices and using appropriate tooling, you can create staircases that are not only functional but also aesthetically pleasing.

Preparation and Measurement

Before you start cutting, ensure you have the correct materials and tools. You'll need two-by-twelve or two-by-six boards for your stringers, depending on the rise and run of your stairs, and a circular saw or jigsaw for cutting.

AD
Limited Edition Combination Jumpsuit
Limited Edition Combination Jumpsuit
How to measure, cut and attach stair stringers
How to measure, cut and attach stair stringers
How To Cut Stringers | This Trick Changes Everything
How To Cut Stringers | This Trick Changes Everything

Measure twice, cut once is an old adage that rings true here. Accurate measurements are vital for a safe and functional staircase. Use the 3-4-5 or 7-24-25 triangles to ensure your stringers aren't just straight but also precisely spaced to match your stair treads.

Marking the Stringer

Lay out your stringer on a flat surface. Using a framing square or a combination square, mark the treads' widths and rises on the face of the stringer. The bottom of the stringer will be the first tread, so measure and mark accordingly.

How to Cut a Square Hole in Wood
How to Cut a Square Hole in Wood
How To Cut Stair Stringers
How To Cut Stair Stringers

For each rise, mark a line perpendicular to the top edge of the stringer, representing the front of the tread. Then, mark a line parallel to the top edge, representing the back of the tread. This will give you the rise and run dimensions you need for each step.

Cutting the Stringer

Set your circular saw or jigsaw blade depth to match the thickness of your stringer. Use a clamped straight edge or the saw's guide to make plunge cuts along the lines you've marked. Be careful not to cut too deep or wide, as this could weaken the stringer.

AD

Once you've cut out the steps, you'll need to cut the stringer to length. Measure from the bottom of the first step to the top of the stringer, then use your saw to make the final cut. Don't forget to consider the width of your landing when measuring.

Creating the Stringer Trench

Now that your stringer is cut, it's time to create the trench that will support your treads. This trench will run diagonally across the back of your stringer, from the top of one step to the bottom of the next.

Using a jigsaw or router, cut a diagonal slot about 2 inches deep and 1 inch wide. This slot will support the back of your treads and provide additional strength to your staircase.

AD

Pocket Holes and Plywood Support

For added strength, you can use pocket hole joinery to attach a plywood support to the back of your stringer. Drill pocket holes into the stringer, then attach the plywood with screws. This will provide extra support for your treads and help distribute the weight of your staircase evenly.

Alternatively, you can use a ledger board to support the back of your stringers. This board will be fastened to the wall studs and provide additional support for your staircase.

Installation

Installing the ramp stringers is the final step in the process. Align the stringers with the wall and with each other, ensuring they're level and plumb. Use joist hangers or toenail the stringers into the studs for support.

AD

Once the stringers are secure, you can attach your treads, using the stringer trench and any additional support you've built into your design. Ensure each tread is level and that the staircase is safe to use.

Caring for your ramp stringers over time involves regular maintenance and inspection. Check for signs of wear or damage, and make repairs as needed. With proper care, your staircase should provide many years of safe and reliable service.

AD