how to cut a padlock with bolt cutters

Mastering Padlock Removal: How to Cut a Padlock with Bolt Cutters

By William Young
AD

At one point or another, everyone needs to cut a padlock, perhaps to access a secured storage unit, a toolbox, or a cycling shed. Bolt cutters can slice through padlocks like butter, making them a preferred tool for the job. This guide shows you how to use bolt cutters to cut a padlock safely and effectively, along with some tips and tricks.

Before we dive in, remember that padlock cutting can be dangerous. Always wear safety gloves and protective clothing. Keep your hands and face away from the cutting area to avoid injury. Now, let's get started with the basics.

The Basics of Padlock Cutting

Bolt cutters, also known as bolt croppers, are designed to cut through bolts, padlocks, and other heavy-duty items. They consist of two handles connected by a hinge and a fixed cutting blade. The moving jaw pivots on this hinge and is forced downwards by squeezing the handles.

AD
5 Ways How Bolt Cutters Can Be Useful During Emergencies
5 Ways How Bolt Cutters Can Be Useful During Emergencies
How to cut off a padlock with bolt cutters? - Wonkee Donkee Tools
How to cut off a padlock with bolt cutters? - Wonkee Donkee Tools
How to cut a metal chain with bolt cutters? - Wonkee Donkee Tools
How to cut a metal chain with bolt cutters? - Wonkee Donkee Tools

Most padlocks consist of a shackle and a body. The shackle is the U-shaped part that passes through the hasp (the loop on the door or post) and the body houses the locking mechanism. When cutting a padlock, your goal is to cut both sides of the shackle to separate it from the body.

Choosing the Right Bolt Cutters

To cut a padlock, you need bolt cutters with a capacity equal to or greater than the shackle's diameter. The capacity is typically stamped on the handles. For most padlocks, bolt cutters with a capacity of 3/8" (9.5mm) to 1/2" (12.7mm) will suffice.

the video shows how to use a pair of pliers on a wooden table with two hands
the video shows how to use a pair of pliers on a wooden table with two hands
1.5M views · 34K reactions | How to pick a basic lock with paperclips! | LockPickNic
1.5M views · 34K reactions | How to pick a basic lock with paperclips! | LockPickNic

Always check the bolt cutter's condition before use. Ensure the blades are clean and sharp, and the handles aren't overly worn or broken. Safety is paramount when using bolt cutters, so don't compromise with a subpar tool.

Preparing the Padlock

Start by removing any rust or debris from the padlock shackle. This prevents particles from entering the cutting area and jamming your bolt cutter. Also, ensure the padlock is secured to a solid, stable surface. Cutting a moving padlock can be challenging and dangerous.

AD

For added safety, you can use a clamp or vise to secure the padlock in place. This ensures the padlock doesn't move while you're cutting it, reducing the risk of injury. Remember, safety first!

Cutting the Padlock

Now you're ready to cut the padlock. Insert the bolt cutter's blades over the padlock shackle, placing them near the bend. Grip the handles firmly but not too tightly to prevent over-engaging the tool, which could cause it to jam or break.

To cut the shackle, squeeze the handles slowly and evenly. The cut should be clean and straightforward if you're using the right tool for the job. If you encounter resistance, stop and apply gentle, steady pressure. If the bolt cutter stalls, it might be due to a poor fit or inadequate capacity. Adjust your position and try again.

AD

Cutting Both Sides

After cutting the first side of the shackle, reposition the bolt cutter to cut the second side. This time, place the blades around the very end of the shackle, near the hasp. Squeeze the handles again to cut completely through the shackle.

It's tempting to try and cut both sides simultaneously to save time. However, this risks jamming the bolt cutter or damaging the tool. Always cut one side at a time for the best results and longevity of your tool.

Removing the Cut Padlock

Once both sides of the shackle are cut, gently remove the padlock from the hasp or whatever it was secured to. If the padlock is stubborn, you can use a combo of gentle persuasion and persuasion – try swaying it gently side to side with the bolt cutter as you slowly remove it.

AD

With the padlock now off, you can dispose of it according to your local regulations, usually with regular metal waste. And with that, your padlock cutting job is complete!

Congratulations, you've just successfully cut a padlock with bolt cutters. Keep your tools well-maintained, and don't hesitate to seek professional advice if you're unsure about a task. Happy cutting!

AD