how to cut a hung up tree

How to Cut a Hung Up Tree: Expert Steps for Safety

By Joshua Robinson
AD

Trees can be a beautiful addition to your yard, but sometimes they can grow too large or become damaged, posing a risk to your home or power lines. When this happens, cutting down the tree becomes a necessity. But how do you safely cut a hung-up tree? It's not as simple as grabbing a chainsaw and starting at the base. In this guide, we'll walk you through the safe and efficient process of felling a hung-up tree.

The first step is identifying the tree's lean and determining the direction it will fall. This is crucial as it guides your cutting strategy. Once you've identified the lean, you can start preparing for the fell.

The Understand the Tree's Lean

Before you start, understand that you should never saw directly into the lean. This can cause the tree to bind up and not fall where you intended. Instead, you'll want to make an undercut, or a horizontal cut on the side opposite the lean.

AD
How to Cut Down a Tree Safely
How to Cut Down a Tree Safely
How To Cut Down A Tree With A Chainsaw | Backyard Mike
How To Cut Down A Tree With A Chainsaw | Backyard Mike
an image of a tree that has been cut down and is labeled in the diagram below
an image of a tree that has been cut down and is labeled in the diagram below

The distance of the undercut depends on the size of your tree. A general rule of thumb is to make the undercut about one-fourth the diameter of the tree. For the hung-up tree, you may need to make it slightly larger to account for the extra weight.

Making the Undercut

The undercut should be level with the ground, and the bottom of the cut should be flat. This will help direct the tree's fall. Use a chainsaw with a long bar to make this cut safely.

How To Perfectly Cut Down A Tree #skills #shorts
How To Perfectly Cut Down A Tree #skills #shorts
How To Cut and lay a Tree where you need it to go.
How To Cut and lay a Tree where you need it to go.

When making the undercut, don't cut all the way through the tree. Leave a small hinge of wood at the bottom of the cut. This hinge will help guide the tree to fall in the intended direction.

Making the Top Cut

Once the undercut is made, you can start making your top cut. This cut is made at a 60-degree angle, starting on the side of the lean and cutting towards the undercut. The purpose of this cut is to relieve tension on the hinge.

AD

The top cut should be about one-third the diameter of the tree. Once you've reached the undercut, the tree should start to fall. If it doesn't, you can use a rope attached to the tree to pull it in the intended direction. Always ensure you're well away from the falling tree when it finally lets go.

The Felling zone

Before you start cutting, mark out a felling zone. This is a widow-maker free area that you've checked for hazards like power lines, buildings, or other trees that could be damaged by falling debris. This zone should be at least twice the height of the tree and twice the distance from the tree's expected fall direction.

It's also crucial to have the right equipment. This includes a chainsaw in good working condition, protective clothing like chaps and a hard hat, work gloves, safety glasses, and hearing protection. Also, have a first aid kit nearby, just in case.

AD

Hazards and Safety Considerations

When cutting a hung-up tree, safety should be your top priority. Hung-up trees are often more dangerous than those standing straight. The extra weight can cause the tree to snap unexpectedly, or it might fall in an unpredicted direction. Always wear appropriate safety gear, and never take risks.

Hanging limbs can also poses a risk. They may break and fall unexpectedly. Always check your surroundings for any potential hazards before you start cutting, and ensure there's no one in the felling zone when you're ready to fell the tree.

After the Fell

Once the tree is down, it's time to clean up. This might involve cutting the tree into smaller pieces for easier disposal or firewood. Always use caution when cutting up a felled tree, as buried debris or hidden hazards can still pose a risk.

AD

Also, consider the environment.ispose of the waste responsibly. If possible, use the wood for your own use or donate it to local wood banks for those in need. Never burn wood that has been treated with chemicals or paints.

Remember, cutting a hung-up tree can be a dangerous job. If you're unsure about how to fell a tree, it's always best to call a professional arborist. They have the equipment and experience to fell the tree safely and efficiently. Happy tree cutting!

AD