how to convert chicco myfit to booster

Convert Chicco MyFit to Booster

By Brian Lopez
AD

Are you a parent looking to convert your Chicco MyFit harness booster seat to a belt-positioning booster? You're at the right place! Converting booster modes not only meets your child's growing needs but also ensures their safety on the road. Let's dive into a step-by-step guide on how to conveniently and safely convert your Chicco MyFit seat.

First, it's crucial to understand that the Chicco MyFit is designed to accommodate your child's growth from toddler to youth stage. It transitions from a harness booster to a belt-positioning booster with two modes: harness booster and belt-positioning booster. In this article, we'll focus on converting it from a harness booster to a belt-positioning booster when your child is about 4 years or older, weighs at least 25 lbs, and is 38" to 57" tall.

Preparing for the Conversion

Before starting, ensure your child meets the size and weight requirements for a belt-positioning booster. Check the user manual for exact measurements and weight limits. Also, ensure you have enough space in your vehicle for the seat in booster mode.

AD
Chicco KeyFit 35 Review - Car Seats For The Littles
Chicco KeyFit 35 Review - Car Seats For The Littles
Boosters for Big Kids? Buckle Up with the Chicco KidFit - TheMonarchMommy
Boosters for Big Kids? Buckle Up with the Chicco KidFit - TheMonarchMommy
Chicco MyFit Review Canada - Car Seats For The Littles
Chicco MyFit Review Canada - Car Seats For The Littles

Next, gather all necessary components. For the Chicco MyFit, you'll typically need the following: harness, harness pouches, head wings, lower connector, and the backrest of the booster seat.

Removing the Harness

Start by removing the harness from the seat. Press the release button located at the top of the seat on either side and pull the harness straps upward to disengage them. Store the harness in the harness pouches provided and set them aside.

Chicco Keyfit 30 Car Seat Review
Chicco Keyfit 30 Car Seat Review
Transitioning To The Chicco MyFit LE Harness + Booster Seat - Veronika's Blushing
Transitioning To The Chicco MyFit LE Harness + Booster Seat - Veronika's Blushing

Now, ensure the harness is not tangled or damaged during storage. Always keep the harnesses safe and within reach in case you need to switch back to harness booster mode.

Adjusting the Head Wings

Next, adjust the head wings to accommodate your child's height. For taller children, raise the head wings to the highest position. For shorter children, lower the head wings. This ensures your child's head is resting against the head wings and not the vehicle's seat or window.

AD

To adjust, press the button on the side of the head wing and slide it up or down to the desired position. Once set, make sure the head wings are snug and secure. You don't want them to wobble or move around while your child is seated.

Converting to Belt-Positioning Booster Mode

With the harness removed and head wings adjusted, it's time to convert the seat to belt-positioning booster mode. This will allow your child to use the vehicle's seat belt for safety while providing the extra height and support they need.

Begin by removing the tether strap from the top of the seat. You won't need this in belt-positioning mode. Next, remove the lower connectors from the lower latches. These are typically stored in the back of the booster seat or in an accessory pocket.

AD

Re-positioning the Backrest

Now, re-position the backrest of the booster seat. In belt-positioning mode, the backrest should be flat against the vehicle seat, providing a stable and supportive surface for your child. To do this, lift the backrest and rotate it forward. The backrest should click into place when correctly positioned.

To ensure the backrest is secure, give it a gentle tug. There should be no wobbling or movement. If it feels loose, adjust it again until it's secure.

Securing the Child in Booster Mode

With the backrest in place, it's time to secure your child in the booster seat. Have your child sit on the booster seat and guide them to the appropriate position. The vehicle seat belt should go over their shoulder, across their chest, and across their lap.

AD

Ensure the lap belt is positioned low on your child's hips or upper thighs and not across their stomach. This is critical for their safety in case of an accident. Also, make sure the shoulder belt is over their shoulder and not across their neck or face.

After securing your child, test the safety of the seat belt by giving it a gentle tug. It should be snug and secure without any slack. If it's too loose or too tight, adjust the booster seat's position or use an certified seat belt positioning clip to improve the fit.

Lastly, always re-check the safety of the belt periodically when your child is older or as they grow. Their height and weight may change, affecting the fit of the seat belt and the booster seat. Regular checks ensure your child is always safe and secure in the vehicle.

And there you have it! You've successfully converted your Chicco MyFit harness booster to a belt-positioning booster. Always remember, the safety of your child is utmost, so never hesitate to consult the user manual or contact Chicco Customer Support if you have any questions or concerns. Happy travels!

AD