how to convert a propane dryer to natural gas

Convert Propane Dryer to Natural Gas: Step-by-Step Guide

By Michael Moore
AD

Converting a propane dryer to natural gas may seem like a daunting task, but with the right steps and precautions, it's a DIY project you can tackle. By making this switch, you could potentially save on energy costs, as natural gas usually burns cleaner and is less expensive than propane.

Before you start, ensure that natural gas is available in your area and that your dryer is compatible with a natural gas conversion. You'll also need a vent converter kit, which includes a regulator, a gas valve, an Allen wrench, and gas line connectors.

Planning and Preparation

First, locate the gas shut-off valve on your propane tank and turn it counterclockwise to shut off the gas supply. Next, connect a gas}}

AD
Converting a Gas Dryer from Natural Gas to Propane
Converting a Gas Dryer from Natural Gas to Propane
Hotpoint Dryer Natural Gas to Liquid Propane Conversion & Installation
Hotpoint Dryer Natural Gas to Liquid Propane Conversion & Installation
a person holding a wrench in front of an oven with the words natural gas to propane conversation
a person holding a wrench in front of an oven with the words natural gas to propane conversation

hose to the shut-off valve and open it fully to purge any residual propane from the line.

Gather Necessary Tools and Parts

You'll need a few tools for this project, including an adjustable wrench, a screwdriver, a drill, and a new gas vent connector. You may also need Teflon tape or pipe dope for sealing the fittings.

Replacing our Propane Gas Furnace with a Ductless Heat Pump
Replacing our Propane Gas Furnace with a Ductless Heat Pump
How To Convert An Oil Furnace To Gas Or Propane—And Should You?
How To Convert An Oil Furnace To Gas Or Propane—And Should You?

It's crucial to purchase a conversion kit that matches your dryer's make and model. Incorrect parts could lead to leaks or(!)ý malfunction.

Safety Precautions

Before starting any work, ensure the dryer is unplugged and turned off at the circuit breaker. If you're unsure about any part of the process, don't hesitate to call a professional.

AD

Test for Leaks

After every step of the conversion process, use a soap-and-water solution to test for leaks. Apply the solution to all gas fittings and connections, then check for bubbles. If bubbles form, you have a leak that needs to be tightened or resealed.

Another crucial safety measure is to always use the correct size and type of gas line connectors. Using inappropriate connectors could lead to gas leaks, which can result in a fire or explosion.

Making the Conversion

With everything ready, it's time to begin the conversion process. First, disconnect the propane gas line from the dryer.

AD

Install the Gas Valve

Remove the propane gas valve and the mounting bracket. Then, install the new gas valve from the conversion kit, following the included instructions. Ensure the valve is securely mounted and that the gas line connector is facing the correct direction.

Tighten the gas line connector to the valve using the included wrench, ensuring it's snug but not overtightened. Apply Teflon tape or pipe dope to the threads to create a tight seal.

Install the Regulator

The regulator reduces the pressure of the natural gas to a level suitable for your dryer. Install it in the same spot where the propane regulator was located, ensuring it's secure and level.

AD

Connect the gas line to the regulator, ensuring it's properly seated and tightened. Again, use Teflon tape or pipe dope to create a tight seal.

Venting and Final Checks

Since natural gas burns cooler than propane, you may need to adjust the dryer's venting. Consult your dryer's manual or online resources to determine if a vent converter is needed.

Install the Vent Converter

If necessary, install the vent converter at the point where the dryer vent exits the house. This converter helps to maintain proper airflow andventing.

Finally, reattach the gas line to the dryer, ensuring it's properly connected to the new gas valve. Turn on the gas supply valves and test your dryer for proper functioning.

Congratulations, you've successfully converted your propane dryer to natural gas! Regularly check your dryer for leaks and maintain it according to the manufacturer's guidelines. If you notice any issues or signs of wear, promptly address them to ensure your dryer's safety and efficiency. Enjoy your savings!

AD