how to connect solid wire to stranded wire

Connect Solid Wire to Stranded: Simple Steps for a Secure Connection

By Hannah Hernandez
AD

Connecting solid wire to stranded wire can pose a challenge due to their distinct differences. Solid wires have a single conductor, while stranded wires have multiple smaller conductors twisted together. To connect these effectively, you'll need to use the right tools and follow the correct steps. Let's dive into the process, ensuring a secure and safe connection.

Before you begin, gather the necessary tools: wire strippers, needle-nose pliers, a Marko or crimping tool, and appropriate crimp connectors. Also, ensure you have the relevant wire gauges ( outskirts of solid and stranded parts of the wire) to choose the right sized connectors.

The Preparation

Understanding the wires' thickness is crucial for secure connection. To find the gauges:

AD
STOP Connecting Stranded Wire Like an Animal - Do it LIKE A PRO!
STOP Connecting Stranded Wire Like an Animal - Do it LIKE A PRO!
How To Connect or Splice Wires Together - 10 Methods
How To Connect or Splice Wires Together - 10 Methods
5 Methods for Connecting Wires, Explained
5 Methods for Connecting Wires, Explained
  • Read the last digit of the wire gauge marking (commonly found on the wire itself or on insulation).
  • Use a wire gauge tool for precise measurements.

Once you've identified the gauges, select suitable crimp connectors. Typically, you'll need an in-line connector for stranded wire and a butt connector for solid wire.

Preparing the Stranded Wire

Straighten the stranded wire's end for about 1/2 inch. To do this gently:

How to Twist Electric Wire Together
How to Twist Electric Wire Together
7 FATAL Wiring Mistakes Most DIYers Don't Know They Are Making | Most Are Guilty of 3
7 FATAL Wiring Mistakes Most DIYers Don't Know They Are Making | Most Are Guilty of 3
  1. Grip the wire with needle-nose pliers.
  2. Carefully bend and twist back and forth until the strands unwind slightly.

Now, strip the insulation, exposing about 1/2 inch of the strands.

Preparing the Solid Wire

Strip the insulation from the solid wire, exposing about 1/2 inch to 3/4 inch of the conductor.

AD
  • Ensure you're stripping the right amount to avoid exposing too much bare wire, which could pose a safety risk.
  • For connections that need more strain relief, strip more wire and twist the strands before insertion.

Now that you've prepared both wires, it's time to connect them.

Connecting the Wires

Choose the right crimp connector based on the wire gauges. For smaller or stranded wires, a butt connector might work, but generally, an in-line connection is recommended for a stronger hold.

Crimping the Stranded Wire

The in-line connector involves a barrel and a cap. Place the exposed strands inside the barrel:

AD
  1. Align the wire gauge with the connector's marks.
  2. Place the cap over the barrel, inserting the wire through the hole.
  3. Using a Marko or other crimping tool, squeeze the cap onto the barrel.
  4. Apply even pressure along the entire length of the connector.
  5. Check the crimp for a solid connection; it should be secure and flush.

Trim off any excess stranded wire from the crimp.

Crimping the Solid Wire

For the solid wire, use a butt connector:

  1. Place the connector over the exposed conductor, ensuring it's fully inserted.
  2. Squeeze the connector using a Marko tool, applying even pressure.
  3. Crimp twice - the first crimp should be used as a reference point; the second should bend the connector securely around the wire.

Ensure the connections are secure before reassembling. Test your connections by attempting to pull the wires apart gently. If they're properly crimped, they shouldn't separate. Always double-check as improper connections can lead to power issues, short circuits, or electrical fires.

AD

Connecting solid wire to stranded wire might seem daunting, but with the right tools and a little practice, it can be easily accomplished. With every connection made, you'll build your skills and confidence. Happy wiring!

AD