how to connect pvc to pex

PVC to PEX Connecting: A Comprehensive Guide

By Steven Lewis
AD

Connecting PVC to PEX, often necessary in plumbing projects, might seem daunting, but with the right tools and techniques, it's a manageable task. This guide will walk you through the process, ensuring a watertight, durable connection that stands the test of time.

Before you begin, it's crucial to understand that PEX (Cross-Linked Polyethylene) and PVC (Polyvinyl Chloride) have different properties and thus require distinct priming and cementing processes. This guide will use the expansion ring method, a common and reliable approach for joining these two materials.

Preparation and Tools

The first step is gathering your tools and materials. You'll need:

AD
How To: Connect PEX to Copper or PVC
How To: Connect PEX to Copper or PVC
two pictures showing the different tools used to build a wooden structure and how they work
two pictures showing the different tools used to build a wooden structure and how they work
Connecting PVC to PEX and Copper
Connecting PVC to PEX and Copper
  • PEX-to-PVC expansion rings
  • Expansion ring pliers
  • Teflon tape
  • PVC primer
  • PVC cement
  • PEX primer and activator (for flared end fittings)
  • Hacksaw or tubing cutter
  • Deburring tool

Once you have everything, prepare your pipes by cutting them to size and deburring the ends. Ensure both pipes are clean and free of any dirt or debris.

Priming the Pipes

Priming is a critical step that prepares the pipe surfaces for cementing. PVC requires a separate primer, while PEX uses a two-part primer and activator system when using flared end fittings.

How To Transition from PVC or Polybutylene to PEX, Copper, or CPVC Pipe
How To Transition from PVC or Polybutylene to PEX, Copper, or CPVC Pipe
PEX Supply Pipe: Everything You Need to Know
PEX Supply Pipe: Everything You Need to Know

For PVC, apply the primer liberally around the pipe's outer surface and let it sit for a moment. For PEX, apply the primer, then the activator, and let it sit for the recommended time (typically 10-15 seconds).

Applying the Expansion Ring

Start by measuring and marking the expansion ring's position on the PEX pipe. The ring should fit snugly onto the pipe, not too tight or too loose.

AD

Use the expansion ring pliers to compress the ring onto the PEX pipe. Ensure it's secure but not over-tightened. Then, apply Teflon tape to the joint to prevent unnecessary rotational movement.

Connecting and Cementing

Now that your expansion ring is in place, it's time to connect the pipes and apply the cement.

Insert the PEX pipe with the ring into the PVC fitting. Ensure the ring is fully inside the fitting. Then, while applying firm rotational force, pull the PEX pipe out until it's securely seated in the fitting. Be careful not to twist the ring off the PEX pipe.

AD

Securing the Connection

Apply PVC cement liberally around the outside of the fitting. Ensure it's well-coated, but avoid dripping excess cement into the fitting.

Once the cement has fully cured (according to the manufacturer's guidelines), your connection is complete. Regularly inspect your work, especially in the initial stages, to ensure no leaks have occurred.

Congratulations, you've successfully connected PVC to PEX! Regular maintenance and occasional checks will ensure your connection continues to perform reliably. If you're unsure about any aspect of the process, always consult a professional plumber for advice.

AD
AD