how to connect mg3620 to wifi

Connect MG3620 to WiFi: Step-by-Step Guide

By Emily Harris
AD

The MG3620 is a versatile scanner and printer that enhances your productivity, but to unlock its full potential, you need to connect it to your Wi-Fi network. This guide will walk you through the process in a clear, step-by-step manner.

Before we dive into the process, ensure your MG3620 is turned on and you have your Wi-Fi network's SSID (network name) and password ready. Let's get started! Remember, patience is key when it comes to technological endeavors.

Preparation and Initial Setup

The MG3620 comes with a USB cable for initial setup, but we'll be focusing on the Wi-Fi connection as it's more convenient for everyday use.

AD
Build a Hands Free Automatic Gate Opener With ESP32 and JENCE J4220U
Build a Hands Free Automatic Gate Opener With ESP32 and JENCE J4220U
How to send SMS using ESP32
How to send SMS using ESP32
How to Set WiFi as Metered Connection on Android
How to Set WiFi as Metered Connection on Android

Before connecting to Wi-Fi, ensure your printer is in 'Wi-Fi Direct' mode. It should display 'Ready for Wi-Fi Connection' on the screen. If not, press the 'Wi-Fi' button on the printer until it shows this message.

Connecting to Wi-Fi via Wi-Fi Direct

For this method, you'll need a smartphone or tablet. Follow these steps:

How to Connect to a WiFi Without Password || Get WiFi Password from your Android Phone 2020
How to Connect to a WiFi Without Password || Get WiFi Password from your Android Phone 2020
How To Connect HP Envy Printer To WiFi
How To Connect HP Envy Printer To WiFi
  • Download and install the 'Brother iPrint & Scan' app from your device's app store.
  • Open the app and tap 'Wi-Fi Connection'.
  • Select your MG3620 from the list of devices displayed.
  • Enter your Wi-Fi network's SSID and password when prompted, then tap 'OK'.

The app should now display 'Connection Successful'. If you're using an iOS device, you'll be prompted to install the 'Brother AirPrint' plugin. Tap 'Install' to proceed.

Connecting to Wi-Fi via the Brother ControlCenter4

If you prefer a more desktop-centric approach, you can use the Brother ControlCenter4 software. Here's how:

AD
  • Download and install the Brother ControlCenter4 software from the official Brother website. Ensure your MG3620 is connected to your computer via USB.
  • Open the software and register your MG3620. Follow the on-screen prompts.
  • Once registered, click on 'Network' in the left-hand menu.
  • Select 'Wi-Fi Connection' and fill in your Wi-Fi network's details in the fields provided. Click 'OK' to continue.

Your MG3620 should now be connected to your Wi-Fi network, allowing for wireless printing and scanning.

Verifying and Troubleshooting the Connection

Once you've completed the steps above, you'll want to verify the connection and troubleshoot any potential issues.

To verify, try printing a test page from your computer or smartphone. If the print job goes through without any issues, your MG3620 is successfully connected to your Wi-Fi network.

AD

Troubleshooting Common Issues

If you're experiencing issues, check the following:

  • Ensure your Wi-Fi network is within range of your MG3620.
  • Check if other devices connected to the network can access the internet. If not, it's an issue with your router, not your printer.
  • Make sure your MG3620's firmware is up-to-date. Check the Brother Support website for the latest firmware.

If you're still having trouble, don't hesitate to contact Brother's customer support for further assistance.

Congratulations! You've successfully connected your MG3620 to your Wi-Fi network, opening up a world of wireless printing and scanning possibilities. Enjoy the convenience and enhanced productivity that this connection brings. Happy printing!

AD
AD