Step-by-Step Guide: Connect Brother MFC Printer to WiFi
Connecting your Brother Multi-Function Centre (MFC) printer to Wi-Fi enables wireless printing, scanning, and copying, making your workspace more convenient and clutter-free. Here's a step-by-step guide to help you achieve this, tailored for Brother MFC models.
Before you begin, ensure your printer and your Wi-Fi router are both turned on and within range. Additionally, have your Wi-Fi credentials (SSID and password) ready. If you're using a Brother MFC series printer, knowing its model number can be helpful for reference.
Direct Wi-Fi Connection
The direct Wi-Fi connection method uses the printer's LCD screen to connect to your network. This method is suitable if your printer has an LCD screen.
The initial process is the same for most Brother MFC printers. However, some advanced models might have slight variations. Refer to your printer's manual for specific instructions if needed.
Access the Wi-Fi Settings
First, turn on your Brother MFC printer. On the printer's LCD screen, navigate to the settings or setup menu using the arrow keys. Look for an option labeled "Network" or "Wi-Fi" and select it.
The exact layout of the menu may vary depending on your printer model. Use the arrow keys to scroll and select the desired option. Next, look for the "Wi-Fi setup" or "Connect to Wi-Fi" option and select it.
Select Your Network
In the Wi-Fi setup menu, select "Search for Wi-Fi" or "Scan for networks". This action will display a list of available Wi-Fi networks in range. Locate your network's SSID (network name) and highlight it using the arrow keys.
Once your network is selected, press the "OK" or "Select" button to move to the next step. If your network is not displayed, ensure your printer is within range of your router and restart the process.
WPS Connection Method
Wi-Fi Protected Setup (WPS) is a secure and convenient way to connect your Brother MFC printer to Wi-Fi. This method is recommended if your router supports WPS and your printer has a WPS button.
This method is particularly useful if you have trouble finding your network or entering the password using the printer's LCD screen. Not all Brother MFC printers support WPS, so check your printer's specifications before proceeding.
Locate the WPS Button
On your Brother MFC printer, find the WPS button. It's usually located on the front panel, next to the Wi-Fi indicator light. On some models, you may need to press and hold the "Wi-Fi" button until the WPS button illuminates.
On your router, locate the WPS button. It's typically found on the rear panel, often near the antenna or DSL port. The WPS button's appearance may vary depending on your router model.
Initiate the WPS Connection
Press and hold the WPS button on your Brother MFC printer for about two seconds until the Wi-Fi indicator light starts blinking. Within two minutes, press and hold the WPS button on your router until the connection is established.
Both the printer and router will indicate when the WPS connection is successful. On your Brother MFC printer, the Wi-Fi indicator light should turn solid, and you'll see a confirmation message on the LCD screen. On your router, the Wi-Fi indicator light should also turn solid.
After connecting your Brother MFC printer to Wi-Fi, test the connection by printing a test page or sending a scan to your email. Enjoy the convenience of wireless printing, scanning, and copying!