How to Connect iPhone to Kenwood Radio Bluetooth
Connecting your iPhone to a Kenwood radio via Bluetooth brings speakerphone functionality, GPS navigation, music streaming, and hands-free calling into your car. Here's a step-by-step guide to pair and connect your devices seamlessly.
Before we proceed, ensure your Kenwood radio has Bluetooth functionality and is updated with the latest firmware. Also, make certain your iPhone's Bluetooth is enabled.
Pairing Your iPhone with Kenwood Radio
The first step involves pairing your iPhone with the Kenwood radio. This process needs to be done only once.
After pairing, both devices will recognize each other automatically, and you can connect them without pairing again.
Checking Kenwood Radio Bluetooth Status
First, ensure your Kenwood radio's Bluetooth is active. Typically, the Bluetooth indicator on the radio will flash if it's on and ready to pair. If not, press the 'BT' button or check your radio's user manual for specific instructions to turn on Bluetooth.
A message like "BT Phone" or "BT Audio" should appear on the radio's display, indicating it's ready to pair.
Pairing iPhone with Kenwood Radio
On your iPhone, go to 'Settings' and tap 'Bluetooth'. Ensure Bluetooth is turned on – the switch at the top should be green. Under 'Other Devices', you should see your Kenwood radio. If not, tap 'AUDIO' or 'DEVICE SELECTION' on your Kenwood radio to initiate pairing.
Tap on your Kenwood radio's name under 'Other Devices' on your iPhone. A pairing code might appear on your radio; enter it on your iPhone when prompted. A 'Pairing Successful' message should appear on your iPhone, and your radio should display 'Connected' or 'Paired'.
Connecting Your iPhone to Kenwood Radio for Calls and Audio
Once paired, you can connect your iPhone to your Kenwood radio for making calls and playing music.
Here's how to do both:
Making a Phone Call
When a call comes in, press the 'Phone' button on your Kenwood radio. The call should automatically be routed through the radio. To make a call, dial the number using the radio's keypad or say a contact's name if Siri is enabled.
During a call, you can use the radio's controls to adjust volume, end calls, or put calls on speakerphone. If your iPhone is synced with your Kenwood radio, you can also initiate a call from the radio by scrolling through your contacts.
Playing Music from iPhone to Kenwood Radio
To start playing music from your iPhone to your Kenwood radio, enable Bluetooth audio on your iPhone. In some Kenwood radios, you might also need to enable 'iPod' functionality.
Open a music app like Apple Music or Spotify on your iPhone. The music should now play through your Kenwood radio. You can control audio playback using the radio's controls. To change the song, adjust volume, or pause playback, simply use your Kenwood radio.
Enjoy your hands-free experience! As always, keep your eyes on the road and your hands on the wheel. Happy listening and driving!