how to connect copper pipes

How to Connect Copper Pipes: A Step-by-Step Guide

By Brian Thomas
AD

Connecting copper pipes is a common task in both new installations and repair work. Copper pipes remain a popular choice for plumbing applications due to their durability, corrosion resistance, and ease of forming. This guide will walk you through the steps to connect copper pipes safely and efficiently, ensuring a long-lasting, leak-free result.

Before starting, gather your tools and materials. You'll need a propane torch, a tube cutter, sandpaper, flux, solder, copper pipe, and fittings. Ensure you have the correct size and type of fittings for your copper pipe. Now, let's dive into the process.

Preparing the Copper Pipes

Clean and debur the pipe ends is the first crucial step. This ensures a strong bond when soldering.

AD
how to hang copper industrial pipe on wood flooring with text overlay that says how to hang copper industrial pipe
how to hang copper industrial pipe on wood flooring with text overlay that says how to hang copper industrial pipe
Copper Development Association Releases New How-To Video
Copper Development Association Releases New How-To Video
How to Connect Gas Pipe Lines
How to Connect Gas Pipe Lines

Copper pipes arrive with a mill scale - a layer of metal oxide on the outside and a burr - a sharp edge on the inside. Use sandpaper to remove the mill scale. For the burr, file or scrape it off with a deburring tool or pliers.

Cutting the Copper Pipe to Size

Measure and mark the pipe where you want to cut it. Use a tube cutter, which grips the pipe and scores it as you turn the cutter's wheel. Continue turning until the pipe twists off cleanly.

Making Solderless Copper Connections
Making Solderless Copper Connections
How To Connect Galvanized Pipe Without Threads [Inc. To PVC, PEX, Or Copper]
How To Connect Galvanized Pipe Without Threads [Inc. To PVC, PEX, Or Copper]

Cut the pipe squarely - a slight angle can cause leaks when soldering. It's a good idea to cut a little long and then deburr rather than cutting short and leaving a burr.

Deburring the Pipe Ends

After cutting, use a knife or a deburring tool to scrape off any remaining burrs on the inside of the pipe. Inspect the inside carefully to ensure it's clean and burr-free.

AD

Next, use sandpaper to deburr the outside of the pipe. This removes any sharp edges and prepares the surface for soldering.

Soldering Copper Pipes

Soldering is the process of joining two pieces of metal together permanently using a filler metal (solder) and a flux. Flux cleans and prepares the metal surfaces, while solder fuses them together.

First, apply flux to both the pipe and fitting. This helps the solder flow smoothly and prevents corrosion.

AD

Heating the Pipe and Fitting

Apply heat evenly around the pipe and fitting using a propane torch. Don't focus on a single spot - this can cause warping or melting. Heat until the flux starts to bubble and flow.

Once the flux is in a liquid state, touch the solder to the joint. The solder will melt and flow into the joint, joining the pipe and fitting. Remove the torch as soon as the solder flows to avoid overheating.

Cleaning and Inspecting the Joint

Wipe away any excess flux or solder with a damp cloth. Inspect the joint for signs of excessive heat, like discoloration or warping. A good joint should look shiny and smooth.

AD

Test the joint by filling the pipe with water and applying pressure. If it holds without leaking, your joint is good to go.

Connecting to Existing Pipes

If you're connecting to an existing pipe, the process is similar but requires additional steps to prepare the fitting for soldering.

The fitting must be cleaned and deburred like the pipe. Then, using a hammer and a piece of wood, gently expand the fitting. This creates a tight fit when you slide it onto the pipe.

Slip Joints

A slip joint is when a fitting slides over a straight piece of pipe. To create a tight seal, slide the fitting onto the pipe, then use a piece of heat-shrink tubing or Kapton tape to wrap the joint.

Apply heat to shrink the tubing or tape, which will expand the fitting and create a tight seal. Then, you can solder as usual.

Soup-to-Nuts Flaring

Soup-to-nuts flaring is when a fitting is flared (expanded) at both ends to connect to two other pieces of pipe. This is useful for making tees or crosses in a line of pipe.

Use a flaring tool to flare both ends of the fitting. Then, slide the flared ends onto the pipes, and solder as usual. Ensure both flared ends are soldered securely.

Remember, always work safely when working with copper pipes. Use heat-resistant gloves and eye protection when soldering. Ventilate the area to prevent inhaling flux fumes. Finally, ensure your joint is leak-free by testing with water.

AD