how to connect 2 downspouts together

Connect 2 Downspouts Together: A Simple Guide

By Hannah Thomas
AD

Connecting two downspouts can help you manage rainwater more efficiently, preventing flooding and soil erosion around your home. Here's a comprehensive guide on how to accomplish this task safely and effectively. Let's dive right in.

Before we start, ensure you have the necessary equipment: a hacksaw, a measuring tape, a marker, a 90-degree elbow fitting, a downspout connector, silicone sealant, and screws or sheet metal screws. This project might seem daunting, but with the right steps, anyone can complete it.

Planning and Preparation

The first step is to plan the pathway of your new downspout. Measure from the current downspout's bottom to the location where you want the new one to begin. This measurement should be the same as the distance between the bottom of your gutter and the ground. Mark this point carefully.

AD
30 Inspiring Downspout Rock Ideas
30 Inspiring Downspout Rock Ideas
How To Extend a Downspout
How To Extend a Downspout
Gutter Leader / Downspout Y Connectors (Standard, Upright, Custom) | JAY KAY Seamless Gutter Supply
Gutter Leader / Downspout Y Connectors (Standard, Upright, Custom) | JAY KAY Seamless Gutter Supply

Next, determine the height and position of your new downspout. It should align with the existing downspout and your desired pathway. Make sure it's high enough to keep water away from your home's foundation and low enough to be securely fastened to the wall.

Cutting the Downspout

Now that you've planned your route, cut the new downspout to the necessary length using a hacksaw. Ensure you make a clean, straight cut, creating a smooth edge to prevent leakage. Measure twice to avoid cutting too short!

a garden bed is in front of a house with rocks and grass on the ground
a garden bed is in front of a house with rocks and grass on the ground
How to Extend a Downspout the Easy Way
How to Extend a Downspout the Easy Way

Also, cut the existing downspout where you want to connect the new one. This will most likely be near the ground. Ensure the cut is level and straight to facilitate a secure connection.

Connecting the Downspouts

At the point where you want to connect the downspouts, insert the 90-degree elbow fitting. The outlet of the fitting should point away from your home. Apply a bead of silicone sealant around the lip of the fitting to ensure a watertight connection.

AD

Slide the existing downspout into the inlet of the fitting. Secure it by pushing it in as far as it will go. You might need to bend the downspout slightly to ensure a snug fit. Fasten both downspouts to the wall using screws or sheet metal screws to prevent movement and leakage. Ensure they're level and properly aligned.

Finishing Touches

Slide the new downspout into the outlet of the 90-degree elbow. Ensure it's secure and level. Apply another bead of silicone sealant around the lip of the outlet for waterproofing. Screw the new downspout to the wall, extending it all the way to your desired endpoint.

Finally, install the downspout connector at the bottom of the new downspout. This will prevent leaves and debris from clogging the system. Ensure it's stable and secure, then install any extension pieces if necessary.

AD

Regular inspection and maintenance will ensure your connected downspouts perform optimally. Remember, water management is key to protecting your home's foundation and landscaping. Happy rainwater management!

AD