how to clip on peloton shoes

Mastering Peloton: A Comprehensive Guide to Clipping On Shoes

By Steven Johnson
AD

Are you excited to enhance your Peloton experience with the right shoe clips? Attaching your Peloton shoes correctly can make all the difference in improving your cycling performance and comfort. Here's a step-by-step guide to help you clip on your Peloton shoes safely and efficiently.

Before you start, ensure you have the right cleats. Peloton shoes come with Look Delta cleats, which are compatible with SPD-SL systems. Double-check your setup to ensure you have the correct equipment.

Understanding Your Peloton Shoes and Cleats

Familiarizing yourself with the components of your Peloton shoes is crucial before you start clipping in. Your shoes have built-in cleats that are already attached. These cleats slot into the pedals of your Peloton bike.

AD
How to Attach Your Cleats | Peloton Support
How to Attach Your Cleats | Peloton Support
PELOTON BIKE SHOES | How To Unbuckle and Remove EASILY
PELOTON BIKE SHOES | How To Unbuckle and Remove EASILY
Peloton Bike Shoes Review - Leah Ingram
Peloton Bike Shoes Review - Leah Ingram

The cleats have two sides: the heal side and the toe side. Both sides have small dials that you'll use to adjust the tension when clipping in and out of your pedals.

Adjusting the Cleat Tension

Adjusting the tension on your cleats is a vital first step in clipping on your Peloton shoes. Excessive tension can make it hard to clip in and out, while too little tension can cause your foot to release unintentionally. Start with the tension dials halfway tightened.

Are DIY bike fits any good? How to set yourself up for comfort on the bike
Are DIY bike fits any good? How to set yourself up for comfort on the bike
How to Loosen Peloton Shoes - Detailed in 9 Steps
How to Loosen Peloton Shoes - Detailed in 9 Steps

To adjust the tension, follow these steps:

  1. Locate the tension dials on either side of the cleat.
  2. Using a screwdriver or an Allen key (depending on your cleat model), loosen or tighten the dials to your desired tension.
  3. Test the tension by clipping in and out of the pedals. If you find the tension is too tight or too loose, adjust accordingly.

Positioning the Cleats

Correct cleat position is crucial for comfort and performance. The cleats should be positioned such that your foot is in a neutral position when clipped in, neither toes nor heels pointing down.

AD

To adjust the cleat position, follow these steps:

  1. With your shoe off the pedal, find the recession in the sole where the cleat sits.
  2. Loosen the screws on either side of the cleat.
  3. Adjust the cleat fore and aft (forward and backward) to match your foot's neutral position.
  4. Tighten the screws to secure the cleat in place.

Clipping into Your Peloton Bike Pedals

Now that your cleats are adjusted and positioned correctly, you're ready to clip into your Peloton bike pedals.

Before you begin, ensure your bike's pedals are in the correct position. You'll want to start with your left foot (assuming you're right-footed).

AD

Clipping in with Your Left Foot

To clip in with your left foot, follow these steps:

  1. Place your left foot on the pedal, with your heel on the pedal's center.
  2. Rotate your foot so that the cleat on your shoe aligns with the slot in the pedal.
  3. Put pressure on your heel and push down as you turn your foot to engage the cleat with the pedal.
  4. Continue turning your foot until you hear a click, indicating a secure connection.

Clipping in with Your Right Foot

Unless you're left-footed, your right foot will be your dominant foot on the Peloton bike. Here's how to clip in with your right foot:

  1. Rotate the crank arm of your bike so that the pedal for your right foot is at the 2 o'clock position.
  2. Place your right foot on the pedal, with your toe on the pedal's center.
  3. Rotate your foot so that the cleat on your shoe aligns with the slot in the pedal.
  4. Put pressure on your toe and push down as you turn your foot to engage the cleat with the pedal.
  5. Continue turning your foot until you hear a click, indicating a secure connection.

Congratulations! You've successfully clipped on your Peloton shoes. This marks an important step in improving your cycling technique and performance. Happy riding and remember to adjust your cleats as needed to maintain optimal comfort and efficiency.

AD
AD