how to clean stoeger m3500

How to Clean a Stoeger M3500

By Ashley Lopez
AD

Caring for your Stoeger M3500 shotgun ensures its reliability and performance over time. Regular cleaning is a crucial aspect of maintaining your firearm. Here's a step-by-step guide on how to clean your Stoeger M3500, keeping it in optimum condition.

Before we start, gather your supplies: a cleaning kit, solvents, bore cleaner, lubricant, a cleaning rod, and brushes suitable for your shotgun. Always follow safety protocols; unload the weapon, double-check it's unloaded, and keep it pointed in a safe direction throughout the process.

Disassembly

Begin by removing the forearm and barrel from the receiver. Use a screwdriver to remove theset screw at the end of the forearm. Pull the forearm forward, then lift it up and off the barrel. Now, remove the barrel by pushing the barrel latch button and lifting the barrel from the receiver.

AD
the ultimate hack to clean burnt stove burners on facebook, and how to use it
the ultimate hack to clean burnt stove burners on facebook, and how to use it
Easy Stovetop Cleaning Hacks: Natural Tips for Gas, Electric & Glass Cooktops
Easy Stovetop Cleaning Hacks: Natural Tips for Gas, Electric & Glass Cooktops
how to clean a steam iron with instructions on how to use it in the kitchen
how to clean a steam iron with instructions on how to use it in the kitchen

Next, remove the bolt. Pull back the bolt handle and rotate it 90 degrees to the right to unlock it. Pull the bolt handle back and to the right to remove the bolt from the receiver.

Breech Face and Chamber

The breech face and chamber should be cleaned with a bore brush dipped in CLP (Cleaner, Lubricant, Protectant) or bore cleaner. Push the brush in and out of the chamber several times, then inspect the extracted residue. Continue cleaning until no residue is visible.

gas stove and oven cleaning tips
gas stove and oven cleaning tips
Cleaning your Masterbuilt Smoker Sportsman Elite 40\
Cleaning your Masterbuilt Smoker Sportsman Elite 40\

Use a breech interesante to remove any remaining fouling on the Breech Face. Lightly lubricate the Breech Face with a small amount of oil.

Bolt and Firing Pin

Clean the bolt and firing pin using a solvent. Use a toothbrush or small brush to scrub away any fouling. Ensure the firing pin moves freely and smoothly. Dry the bolt and firing pin thoroughly, then lightly oil them.

AD

Barrel and Magazine

Clean the barrel using a cleaning patch and solvent. Push the patch through the barrel using the cleaning rod, ensuring it completely exits the muzzle. Repeat with a dry patch to remove any remaining solvent. Use a bore snake or jag to remove any remaining fouling.

Next, clean the magazine. Remove the magazine tube from the forearm. Use a magazine brush and CLP to clean the magazine tube, ensuring the follower moves smoothly. Use a dry patch to remove any remaining solvent, then lightly oil the mechanism.

Trigger Group

The trigger group should be disassembled for deep cleaning. Inspect all parts for any signs of wear or damage. Use a solvent and small brush to clean away any fouling. Dry carefully, then reassemble.

AD

Reassembly is the reverse of disassembly. Ensure everything is properly aligned and lubricated before firing. Store your Stoeger M3500 in a safe, dry place, preferably with the action open to prevent rust.

Regular cleaning and maintenance extend your Stoeger M3500's lifespan and ensure consistent performance. Embrace it as a responsible firearms owner and enjoy your shooting experiences to the fullest.

AD