Mastering Shark Navigator: Step-by-Step Guide to Cleaning Lift-Away Filter
If you're an owner of a Shark Navigator Lift-Away vacuum cleaner, you know how powerful and convenient it is for tackling various cleaning tasks around your home. However, to keep your vacuum working at its best, it's crucial to maintain its filters regularly. This article will guide you through the process of cleaning your Shark Navigator Lift-Away filter, ensuring longevity and optimal performance.
Before we dive in, it's essential to understand that your Shark Navigator Lift-Away comes with two types of filters: the post-motor filter and the pre-motor filter. Both play a vital role in capturing dirt, dust, and allergens, improving your indoor air quality. Let's explore how to clean each type effectively.
Cleaning the Pre-Motor Filter
The pre-motor filter traps large particles before they reach the motor, protecting it from wear and tear. Here's how to clean it:
Step-by-Step Cleaning Process
1. Unplug and Disassemble: First, ensure your vacuum is unplugged from the power source. Remove the dust canister by pulling up on the handle. Then, twist and lift the top half of the canister to access the filter.
2. Remove the Filter: The pre-motor filter is usually located on top of the dust canister. Gently remove it and check if it's reusable (some models use disposable filters). If it's reusable, proceed to the next step; if not, replace it with a new one.
Caring for Reusable Pre-Motor Filters
1. Tap and Shake: Tap the filter gently against a solid surface to dislodge any embedded dirt. Then, shake the filter to remove remaining loose debris.
2. Wash Gently: If your filter is heavily soiled, you can rinse it under lukewarm water, running water in one direction only. Be careful not to lose any of the filter material in the process.
3. Air Dry: Allow the filter to air dry completely, preferably in a sunny spot. It's essential to wait until the filter is entirely dry before reinserting it, as moisture can damage the motor.
Cleaning the Post-Motor Filter
The post-motor filter captures finer particles, ensuring that only clean air is expelled from the vacuum. Here's how to clean it:
Step-by-Step Cleaning Process
1. Locate the Filter: The post-motor filter is found near the exhaust vent at the back of the vacuum. You might need to consult your user manual to determine its exact location.
2. Remove and Clean: Once you've located the filter, carefully remove it and tap it gently against a solid surface to dislodge any dirt. You can also use a soft brush to remove any stubborn debris.
Replacing Disposable Post-Motor Filters
If your Shark Navigator Lift-Away uses disposable post-motor filters, replace it with a new one every 3-6 months or when your vacuum starts to lose suction power. Regularly checking and replacing the filter helps maintain your vacuum's performance and ensures optimal air quality.
Remember, cleaning your filters regularly not only enhances your Shark Navigator Lift-Away's performance but also prolongs its lifespan. By following these steps, you'll keep your vacuum running like new and maintain a clean, healthy home environment. Happy cleaning!