Mastering Reel Care: Step-by-Step Guide to Clean!
Reels, those indispensable pieces of fishing gear, can get pretty grimy after lengthy use. But fear not, cleaning and maintaining your reel is neither laborious nor time-consuming. With the right know-how and some elbow grease, your reel will be as good as new in no time. Let's delve into the step-by-step process of cleaning your reel effectively and keeping it in top-notch condition.
Before you start, make sure you have the necessary tools at hand. You'll need some fresh-water, a soft-bristle brush or a toothbrush, a cloth orponge, reel oil, and some mild detergent. Now, let's get started!
Preparing Your Reel for Cleaning
First things first, remove the reel from the rod. This step might seem obvious, but it's crucial to avoid any unnecessary damages during the cleaning process.
Next, dismantle the reel. The extent of dismantling depends on the type of reel you have. For spinning reels, remove the spool and bail. For baitcasting reels, remove the side cover to expose the internals. Be extra careful with tiny components to avoid losing them.
Cleaning the Exterior
Start by giving the exterior a good rinse with freshwater. Use a soft-bristle brush or a toothbrush to gently scrub away dirt and grime. Be mindful of any metal parts, as harsh scrubbing can cause damage.
A mix of mild detergent and water can help tackle stubborn stains. Rinse thoroughly afterwards to prevent any residue from causing corrosion.
Cleaning the Interior
For the interior, use a cloth or a sponge dampened with freshwater to wipe away any debris or dirt. For hard-to-reach spots, use the soft-bristle brush gently.
Pay special attention to the ball bearings. They're the most critical components ensuring a smooth operation. If they appear dirty, soak them in a bowl of mild detergent and warm water for about 15 minutes, then rinse and dried thoroughly.
Drying and Maintaining Your Reel
Once cleaned, let your reel dry completely. This might take a few hours or even overnight. Impatience is a virtue here, as you don't want to lubricate a wet reel.
Avoid drying it under direct sunlight or heat, as this can degrade the grease and cause more harm than good.
Lubricating the Reel
After ensuring your reel is bone-dry, it's time to apply reel oil to the correct spots. Typically, this includes the ball bearings, gears, and the bail. Make sure to apply the oil sparingly; overgreasing can attract dirt and cause more harm than good.
For the bail, use a small amount of oil and a cotton swab to apply. Be careful not to get any oil on the bail wire.
Reassembling Your Reel
Now that your reel is clean and lubricated, it's time to put it back together. This is the perfect opportunity to inspect all the components for any damages and replace any wore-out parts. Here's where that extra care while dismantling comes handy.
Reassemble your reel carefully, following the reverse order of dismantling. Make sure everything is correctly aligned and properly attached.
Regular cleaning and maintenance is crucial to your reel's longevity. After each fishing trip, give it a quick clean and lightly lubricate it. Your reel will thank you with years of faithful service. So, next time you're planning a fishing escapade, don't forget to give your reel some TLC. Happy fishing!