LG Dryer Moisture Sensor Cleaning: DIY Guide
If you've noticed your LG dryer running cycles longer than usual or not drying clothes as efficiently, it might be time to check your moisture sensor. This part ensures that your dryer knows when your clothes are dry, preventing over-drying and energy waste. Here's a simple guide on how to clean the moisture sensor on your LG dryer for optimal performance.
Before we begin, ensure you've unplugged your dryer from the power source to prevent any electrical accidents. Also, gather your tools: a screwdriver, a soft-bristle brush or cotton swabs, and some rubbing alcohol or a mild cleaning solution.
Locating the Moisture Sensor
Before you start cleaning, you need to find the moisture sensor in your LG dryer. It's usually located at the front of the dryer, behind a small access panel. On LG dryers, this panel is typically secured with one or two screws.
Once you've removed the panel, you should see the moisture sensor - it looks like a small square or round metal component with electrical contacts. On some models, it might be behind the lint screen or access panels on the sides of the dryer.
Preparing to Clean the Moisture Sensor
Before you clean the sensor, take a photo of the wiring for future reference. Then, carefully remove any visible lint or debris using your soft-bristle brush or cotton swabs. Be gentle to avoid damaging the sensor.
If there's significant buildup, you might need to use your cleaning solution. Apply a small amount to your brush or swab and gently scrub the sensor, avoiding the electrical contacts. Be careful not to let any liquid drip onto the contacts or the floor of the dryer.
Cleaning the Moisture Sensor
After removing all visible dirt, use a damp (not wet) cotton swab or soft cloth dampened with rubbing alcohol or your cleaning solution to wipe the sensor. Again, be gentle and avoid the electrical contacts. You can also use compressed air to blow away any remaining debris.
Wipe the sensor dry with a clean cloth, then use a dry cotton swab to gently wipe it once more. Ensure the sensor is completely dry before replacing the access panel. If it's still damp, you can use a hairdryer on the lowest heat setting to speed up the drying process.
Testing the Moisture Sensor
Once the sensor is dry, it's time to test it. replace the access panel and secure it with the screws. Then, plug your dryer back in and run a test cycle on the lowest heat and highest spin speed settings.
Rather than using actual clothes, you can put a clean, dry towel in the dryer for this test. When the cycle ends, check if the towel is still slightly moist. If it is, your sensor might still be]), etting false readings. Repeat the cleaning process if necessary, ensuring that the sensor is completely dry each time.
Replacing the Moisture Sensor (if necessary)
If cleaning doesn't solve the problem, it might be time to replace the moisture sensor. Before you do, make sure you've followed all the steps correctly. If you're sure the issue persists, consult your user manual or contact LG customer support for guidance on replacing the part.
Buying a genuine LG replacement part and following the manufacturer's instructions will ensure you're using the correct part and installing it safely.
Regular cleaning and maintenance can help extend the life of your LG dryer and keep it running efficiently. Remember, a clean moisture sensor means your dryer knows when to stop, saving you money on energy bills and preventing wear and tear on your machine. Happy cleaning!