how to clean intex salt cell

How to Clean Intex Salt Cell: Step-by-Step Guide

By David Martinez
AD

Ready to revive your Intex salt cell to its former glory? Maintaining a saltwater hot tub isn't just about adding salt; it's about keeping your salt cell clean and in tip-top shape. So, let's roll up our sleeves and dive into the world of salt cell cleaning.

Before we begin, remember that cleaning your salt cell regularly will help lengthen its lifespan and maintain your hot tub's sanitizer levels. So, let's not waste time and get started!

Understanding Your Salt Cell

First, let's grasp the basics of a salt cell. It's the brain behind your hot tub's saltwater sanitizing system, turning plain water and salt into chlorine. Now that you've got a handle on that, let's move on to understanding why cleaning is crucial.

AD
How to Clean a Salt Cell
How to Clean a Salt Cell
How to Tell If Your Salt Cell Needs Replacing
How to Tell If Your Salt Cell Needs Replacing
How To Clean A Salt Cell
How To Clean A Salt Cell

Over time, mineral deposits and scale build-up can clog the salt cell's plates, reducing its efficiency. This can lead to increased electrical consumption and even accidental cell death. Sounds scary, right? But don't worry, we're here to help you avoid that!

When to Clean Your Salt Cell

So, how often should you clean your salt cell? As a general rule, it's recommended to clean it every 3 to 4 months. However, if you notice a decrease in the sanitizer levels or an increase in electrical consumption, it might be time for an early clean.

How To Clean A Pentair IntelliChlor Salt Cell: Step-By-Step
How To Clean A Pentair IntelliChlor Salt Cell: Step-By-Step
Clean salt cell in intex salt water pump
Clean salt cell in intex salt water pump

Additionally, if you live in an area with hard water, you might need to clean it more frequently due to increased mineral buildup. Keep an eye on your cell's efficiency, and it'll guide you on when to give it a good scrub!

What You'll Need

Before you dive in, grab these essentials:

AD
  • Renewable salt cells cleaner, like Intex's sand sodium hexametaphosphate at least once a year. These cleaners help remove scale and other mineral deposits.
  • A bucket
  • A soft-bristle brush or an old toothbrush
  • Rubber gloves
  • A cloth or towel

Cleaning Your Salt Cell: Step-by-Step

Now that you've got your gear, let's clean that cell like a pro!

First, unplug your saltwater system from the power source to ensure safety. Then, remove the cell from your hot tub. The process may vary depending on your model, but it's usually as simple as unscrewing it.

Soaking the Cell

Once removed, place the cell in a bucket filled with water. Add the recommended amount of cleaner, usually half a packet for the first cleaning, and mix well. Let the cell soak for about 15-30 minutes, allowing the cleaner to work its magic, breaking down the mineral deposits.

AD

Scrubbing the Cell

After soaking, take your soft-bristle brush, and gently scrub the cell's plates. Move the brush in a back-and-forth motion to remove loosened mineral deposits. For hard-to-reach spots, an old toothbrush can come in handy. Be sure to wear those rubber gloves to protect your hands from the cleaner.

Once you've given it a good scrub, rinse the cell thoroughly with fresh water. Inspect the plates to ensure they're clean. If not, repeat the soaking and scrubbing process. It's better to spend a little more time now than to struggle with a stubborn cell later!

Descaling Your Salt Cell

If your cell still has stubborn mineral deposits after cleaning, it might be time for a more aggressive approach – descaling. Descalers are stronger acids that can remove even the toughest scale build-up. But remember, use them sparingly, as they can damage the cell if not used correctly.

AD
rinse the cell meticulously and inspect it again. If it's still not clean, you might need a new cell, as it could be too worn out.

Rinsing and Drying the Cell

After cleaning and/or descaling, rinse the cell one final time with fresh water. Then, dry it thoroughly with a cloth or towel. Ensure no moisture is left on the cell's plates to minimize future mineral buildup.

Finally, reinsert the cell into your hot tub, ensuring it's properly secured and plugged back into the power source. Turn on the system and let it run for a few minutes to generate new chlorine.

And there you have it! Your salt cell is now clean and ready to keep your hot tub water sparkling. Just remember, prevention is key. Regular cleaning, along with proper water maintenance, will help extend your salt cell's lifespan.

So, grab your calendar and set a reminder for your next cleaning session. Your hot tub and your wallet will thank you!

AD