how to clean ignitor on furnace

How to Clean Your Furnace Ignitor: A Simple Step-by-Step Guide

By Robert King
AD

Winter's chill is upon us, and that means one thing: it's time to fire up our furnaces! But before you crank up the heat, let's ensure our furnaces are in tip-top shape. Today, we're focusing on a crucial component of your furnace: the ignitor. Here's a comprehensive guide on how to clean your furnace ignitor, ensuring your home stays cozy all season long.

First things first, safety! Always ensure your furnace is turned off at the main switch and let it cool down before attempting any cleaning or maintenance. Now, let's dive into the world of furnace ignitors and see how we can keep them running smoothly.

Understanding Your Furnace Ignitor

Before we clean, let's understand what we're dealing with. Your furnace's ignitor is like the matches for your fireplace. When you turn up the heat, an electrical signal triggers the ignitor to jump into action. It creates a spark that ignites the gas, creating the warm air that keeps your home comfortable.

AD
How To Clean a Furnace Ignitor
How To Clean a Furnace Ignitor
Troubleshooting a Furnace Not Turning On - Today's Homeowner
Troubleshooting a Furnace Not Turning On - Today's Homeowner
How To Clean A Furnace Ignitor - Hunker
How To Clean A Furnace Ignitor - Hunker

Ignitors can be either hot surface ignition (HSI) or standing pilot types. HSIs are more common these days, and they're pretty straightforward to clean. But don't worry, we'll walk you through both types to ensure everyone's covered.

When to Clean Your Furnace Ignitor

Regular cleaning is key to keeping your furnace running efficiently. Ideally, give your ignitor a deep clean once a year, just before the heating season kicks in. However, if you notice any of these signs, it might be time for an early cleaning:

How To Clean A Goodman Furnace Heat Exchanger
How To Clean A Goodman Furnace Heat Exchanger
How To Clean A Lennox Furnace
How To Clean A Lennox Furnace
  • Weak or no heat.
  • Strange noises coming from the furnace.
  • Sooty streaks on the inside of your furnace.
  • Yellow instead of blue flame (if visible).

Cleaning HSI Ignitors

Hot surface ignition ignitors are easy to access and clean. Here's a simple step-by-step guide:

Tools needed: Screwdriver, stiff-bristled brush (soft), vacuum cleaner, and safety glasses.

AD
  1. Switch off the power at the main panel and remove the furnace access panel using a screwdriver.
  2. Locate the ignitor. It's usually a red, ceramic element in the combustion chamber. Put on your safety glasses before proceeding.
  3. Inspect the ignitor. If it's black or dark brown, it's time for a cleaning. Use a soft, stiff-bristled brush to lightly scrub the ignitor from both ends. Be gentle to avoid damaging the ceramic.
  4. Vacuum away the residue. This step is crucial to prevent the debris from entering the rest of the furnace.
  5. Re-assemble your furnace and turn the power back on. Run a test cycle to ensure the ignitor is functioning correctly.

Cleaning Standing Pilot Ignitors

Standing pilot ignitors are a bit trickier but still doable with a little patience.

Tools needed: Screwdriver, pliers, safety glasses, and maybe a new thermocouple orstanding pilot assembly if replacement is needed.

  1. Turn off the power and the gas supply to the furnace.
  2. Locate the ignitor, which is part of the standing pilot assembly. Remove the access panel and use pliers to carefully remove the assembly. Make sure to shut off the gas supply at the emergency shut-off valve before removing the assembly.
  3. Inspect the ignitor. If it's covered in soot, it's time for a clean. You can use a soft brush or even a piece of fine-grit sandpaper to gently scrub the ignitor.
  4. If the ignitor is damaged or has lost its shine, it might be time for a replacement. Standing pilot assemblies are relatively affordable and easy to find.
  5. Re-assemble your furnace, turn on the gas supply, but leave the power off for now. Then, with a striking match, light the pilot. Follow your furnace's instructions for this step.
  6. Once the pilot is lit, turn the power back on and run a test cycle.

Regular cleaning of your furnace ignitor is crucial for its lifespan and your furnace's efficiency. But remember, if you're not comfortable performing these tasks yourself, always call in a professional HVAC technician. Your safety and comfort are our top priorities!

AD

Now that your furnace is all cleaned and ready to go, sit back, relax, and enjoy the warm, cozy home you deserve. Happy heating!

AD