Mastering Hayward Turbo Cell Cleaning: Step-by-Step Guide
Regular cleaning and maintenance of your Hayward TurboCell is key to ensuring optimal performance and longevity. Over time, dirt, algae, and calcium deposits can build up, impeding your pool's filter system and water flow. This comprehensive guide will walk you through the process of cleaning your Hayward TurboCell, ensuring you maintain a sparkling clean pool and a smoothly operating filter system.
Before you begin, gather all necessary equipment and materials. You'll need a screwdriver, a Phillips head or flathead depending on the model, a cleaning solution, a garden hose with a suitable nozzle, and some rags or soft brushes for scrubbing. Also, remember to schedule your cleaning on a day when you won't be using your pool, as you'll need to shut down the filter system temporarily.
Unmounting and Inspecting the TurboCell
Begin by turning off the pool pump and isolating the TurboCell from the plumbing system. Use the screwdriver to remove the union nuts that connect the cell to the plumbing lines. Once detached, carefully remove the TurboCell from its mount.
Next, fully disassemble the TurboCell. This typically involves removing the top cap, theAudit tube, the bottom hex, and the internal filtering element. Inspect these components for any signs of damage or wear. If you find any, it might be time to replace those parts.
Cleaning the Internal Filtering Element
The internal filtering element, also known as the Lamar filter, is the heart of the TurboCell system. To clean it, use a suitable cleaning solution - Hayward recommends their own Sparkle Up cleaning kit. Apply the cleaning solution to the element, ensuring it's fully coated, and then use a soft brush or rag to gently scrub the dirt away.
Rinse the element thoroughly with clean water using a garden hose. Be careful not to dislodge the fragile debris-deflecting technology or damage the element in any way. Allow the element to air dry completely before reassembly.
Cleaning the Housings and Nozzle Assembly
The outer housing of the TurboCell, including the Audit tube and the bottom hex, can also accumulate dirt and debris. Use a suitable cleaning solution to clean these surfaces, ensuring you remove all visible dirt. A soft brush can help with stubborn deposits.
Similarly, clean the nozzle assembly. Remove any debris or buildup that may have accumulated. Make sure the assembly is functioning smoothly and there are no blockages in the water flow.
Reassembling and Mounting the TurboCell
Once all components are clean and dry, reassemble the TurboCell. The housing cap should be the first piece to go on, followed by the Audit tube, the filtering element, and finally the bottom hex. Make sure everything is properly aligned and securely fitted.
Reconnect the TurboCell to the pool plumbing system. Ensure the union nuts are tight and the connections are secure. Then, turn the pool pump back on. Verify that water is flowing freely through the system and the filter is functioning correctly.
Backwashing and Inspection
After reinstallation, it's a good practice to backwash your filter system to remove any loose debris. This step helps maintain filter efficiency and ensures smooth operation. Follow your filter system's instructions for backwashing.
Conduct a final inspection of the system. Check for any leaks, ensure water flow is smooth, and monitor the filter's performance over the next few hours. Regular cleaning and maintenance will help maintain your pool's health and ensure your Hayward TurboCell runs trouble-free for seasons to come.
Remember, preventative care is key in pool maintenance. Regularly check your TurboCell for signs of wear or buildup, and clean it as needed. By doing so, you'll not only extend the life of your equipment, but also maintain the clarity and hygiene of your pool water. Happy swimming!