how to clean double barrel shotgun

Clean Your Double Barrel Shotgun: Step-by-Step Guide

By Robert Rodriguez
AD

Caring for a double barrel shotgun involves more than just cleaning it after use. Regular maintenance ensures your shotgun performs at its best, lasts longer, and gives you peace of mind. Here's a comprehensive guide on how to clean your double barrel shotgun, covering disassembly, cleaning, and reassembly. Let's dive in, shall we?

Before we start, gather your cleaning kit, which should include a bore brush, cleaning patches, child-proof cleaning solvent, lubricant, a cleaning rod, and a few rags. Safety first, ensure your shotgun is unloaded and check again. Now, let's get started.

Disassembly and Initial Cleaning

Begin by removing the barrels from the action. On side-by-side shotguns, lift the barrels off the action. For over-under models, press the safety button and use a tool or your thumb to push the top lever down and open the shotgun.

AD
How To Clean Homemade Shotgun Barrel With A Bore Snake | How To Use A Boresnake
How To Clean Homemade Shotgun Barrel With A Bore Snake | How To Use A Boresnake
How to clean a shotgun barrel
How to clean a shotgun barrel
How to Clean a Shotgun: End of Season Care
How to Clean a Shotgun: End of Season Care

Multiple choke tubes? Unscrew them from the muzzle. Then, remove the fore-end by pushing it forward and down. Now, your shotgun is fully disassembled and ready for a deep clean.

Cleaning the Barrels

Keep your shotgun vertically, muzzle down. Dip a bore brush into the solvent and push it through the bore. Let the solution sit for a few minutes to break down the carbon and fouling. Pull the brush back, then attach the cleaning rod and push a soaked patch through the bore.

two toothbrushes and some cotton swabs on a white counter top with other items
two toothbrushes and some cotton swabs on a white counter top with other items
Cleaning Shotgun Barrels - Gun Maintenance
Cleaning Shotgun Barrels - Gun Maintenance

Repeat this process until the patch comes out clean. Use a dry patch to remove excess oil, then apply a thin coat of lubricant. Yes, that's right, lubricate your barrels to protect them between cleanings.

Cleaning the Action

Use a rag and the solvent to clean the receiver, trigger group, and other exposed metal surfaces. Pay special attention to the area behind the breech face and the bolt slides. Remove any remaining solvent with a clean, damp rag.

AD

Don't forget about the magazine tube and the ejectors, if your shotgun has them. Use a pipe cleaner or a small brush to remove any debris. Apply a light coat of lubricant to metal parts, but be sparing with it. Excess oil can attract dust and dirt.

Reassembly and Final Touches

Start with the trigger group. If you've cleaned it thoroughly, it should slide back into place smoothly. Ensure the sears are engaged and the trigger functions properly.

Reinstall the fore-end, then align and secure the barrels to the action. Remember to oil the rib and the metal surfaces where the barrels and action meet. Finally, if you removed choke tubes, screw them back in and ensure they're tight.

AD

Checking Functionality

Open and close the shotgun a few times to ensure the action functions smoothly. Use the safety and dry-fire the shotgun to check the trigger pull. Everything should feel smooth and tight.

Congratulations, you've just given your double barrel shotgun a proper clean. With this regular routine, your shotgun will serve you well for many years to come. So, grab your gear, and let's get out there and enjoy the range or the field. Safe shooting!

AD