how to clean benelli m4

Mastering Benelli M4 Cleaning: A Step-by-Step Guide

By Melissa Johnson
AD

The Benelli M4 is a versatile and reliable semi-automatic shotgun, perfect for various applications, from sport shooting to law enforcement. Routine cleaning is crucial to maintain its performance and longevity. This comprehensive guide will walk you through the process of cleaning your Benelli M4, ensuring it remains in top working order.

Proper cleaning should be done after every 500 rounds or up to every three months, depending on the type of ammunition used. Regular cleaning removes carbon buildup, prevents rust and ensures smooth operation. Always ensure the shotgun is clear and unloaded before starting the cleaning process.

Gather Your Cleaning Supplies

Before you begin, assemble your cleaning supplies. You'll need:

AD
Over-Upgrading a Turknelli (MAC 1014) Benelli M4 Clone
Over-Upgrading a Turknelli (MAC 1014) Benelli M4 Clone
Perfectly Upgrading The Benelli M4 ($4500 Setup)
Perfectly Upgrading The Benelli M4 ($4500 Setup)
Tactical Upgrade: Benelli M4 EXT Review
Tactical Upgrade: Benelli M4 EXT Review
  • Cleaning solvent like Hoppes No. 9 or Break-Free CLP
  • Cleaning patches
  • Synthetic or cotton mops
  • Toothbrush with soft bristles
  • Rags or shop towels
  • Scrap of donut-shaped rubber
  • Gun oil or grease

Disassembly of Benelli M4

The Benelli M4 can be partially disassembled for cleaning. Here's how:

  1. Remove the bolt by pressing the bolt release button and pulling back on the bolt handle.
  2. Push the trigger group forward while simultaneously rotating it upwards to remove it from the receiver.
  3. Pull the firing pin retainer towards you and rotate it clockwise to remove it. Pull the firing pin out.

Cleaning Major Components

Now that your Benelli M4 is partially disassembled, you can start cleaning the major components:

BENELLI M4 UPGRADES & MAGAZINE TUBE INSTALL!
BENELLI M4 UPGRADES & MAGAZINE TUBE INSTALL!
Tti Benelli M4, Benelli M4 With Red Dot, Benelli M4 Custom, Benelli Mr1, Benelli M4 Modified, Benelli M4 Taran Tactical, Benelli M4 Tactical, Benelli M4 Wood Stock, Benelli M1
Tti Benelli M4, Benelli M4 With Red Dot, Benelli M4 Custom, Benelli Mr1, Benelli M4 Modified, Benelli M4 Taran Tactical, Benelli M4 Tactical, Benelli M4 Wood Stock, Benelli M1
  1. Soak your patches and mops with cleaning solvent, ensuring they are well-lubricated before scrubbing the components.
  2. Scrub the barrel interior, bolt, firing pin, trigger group, and receiver using solvent-soaked patches and mops. Use a toothbrush to clean intricate areas and crevices.

Cleaning the Gas System

The gas system plays a crucial role in the Benelli M4's operation. Regular cleaning ensures smooth functioning.

Using solvent-soaked patches and mops, clean the gas cylinder, gas piston, and gas key. Pay special attention to the gas cylinder, ensuring it's free of carbon buildup.

AD

Reassembly

After cleaning, dry all components thoroughly using rags or shop towels. Inspect the parts for any signs of damage or excessive wear.

Beforeassembly, lubricate the components following Benelli's recommendations. The primary focus should be on the gas system, pivot pins, and moving parts.

Final Inspection

Once assembled, perform a final inspection to ensure everything is functioning correctly. Cycle the action a few times to distribute the lubricant evenly. Check for any signs of friction or misalignment.

AD

Your Benelli M4 is now ready for its next outing, clean and well-maintained. Regular cleaning is the best way to keep your shotgun in excellent working condition. Happy shooting!

AD