how to clean auger on pit boss

"Step-by-Step: Cleaning Your Pit Boss Auger"

By Amanda Lopez
AD

The Pit Boss grill, known for its robust performance and versatility, can sometimes require a deep clean, including the auger. The auger, a crucial part of the grill's operation, can accumulate grease, food debris, and other residue over time. To ensure your Pit Boss grill performs optimally and safely, it's essential to know how to clean the auger. In this comprehensive guide, we'll walk you through the process step-by-step, ensuring your grill stays in top shape.

Before we dive into the cleaning process, it's important to note that regular maintenance is key to prolonging the life of your Pit Boss grill. A well-maintained auger will not only improve the grill's efficiency but also prevent potential issues that could lead to costly repairs. So, let's roll up our sleeves and get started.

Safety First: Preparing the Grill

Safety should always be your top priority when handling any machinery. Before cleaning the auger, ensure your Pit Boss grill is turned off and has cooled down. This will prevent any burn injuries and allow you to handle the parts safely.

AD
How to Clean or Replace any Pit Boss Auger | Pit Boss Pit Stops
How to Clean or Replace any Pit Boss Auger | Pit Boss Pit Stops
How To Clean A Pit Boss Pellet Grill (In 6 Easy Steps With Pictures)
How To Clean A Pit Boss Pellet Grill (In 6 Easy Steps With Pictures)
How to Empty a Pit Boss Pellet Grill Hopper
How to Empty a Pit Boss Pellet Grill Hopper

Once your grill is cool, unplug it from the power source to prevent any accidental startup. This might seem like a minor detail, but it's a critical safety measure that should never be overlooked.

Gathering Your Cleaning Tools

To clean the auger effectively, you'll need a few essential tools. Here's a list to ensure you have everything ready:

Pellet Grill Maintenance
Pellet Grill Maintenance
How To Clean Auger On Pit Boss Vertical Smoker | CleaNESTOR
How To Clean Auger On Pit Boss Vertical Smoker | CleaNESTOR
  • Coarse cloth or brass bristle brush
  • Degreaser or grill cleaning soap
  • Hot water
  • C SPECIALALYntton cloths or sponges
  • Paper towels or rags
  • Latex or rubber gloves

Accessing the Auger

The auger on your Pit Boss grill is located behind the grease tray. To access it, you'll first need to remove the grease tray. On most models, this involves simply sliding it out. Once the grease tray is removed, you should see the auger located at the bottom of the grill.

Before removing the auger, take a moment to inspect it for any signs of wear and tear. If the auger looks damaged or faulty, it may need to be replaced before you proceed with the cleaning process.

AD

Deep Cleaning the Auger

Now that you've accessed the auger and ensured it's in good condition, it's time to give it a thorough clean. The cleaning process involves two main steps: degreasing and scrubbing. Let's dive into each step in detail.

Degreasing the Auger

Degreasing the auger is the first step in cleaning it. It helps to break down and dissolve the grease and residue accumulated on the auger's surface. To degrease the auger, follow these steps:

  1. Pour a generous amount of degreaser or grill cleaning soap onto a cloth or sponge.
  2. Wipe the auger thoroughly with the degreaser-soaked cloth or sponge, ensuring every part of the auger is covered.
  3. Let the degreaser sit for about 10-15 minutes. This allows it to break down the grease and residue effectively.

Scrubbing the Auger

After degreasing, it's time to scrub the auger clean. For this step, you'll need a coarse cloth or brass bristle brush. Follow these steps to scrub the auger:

AD
  1. Dip the cloth or brush into hot water, ensuring it's well-saturated.
  2. Scrub the auger firmly but gently, using circular motions to remove the loosened grease and residue.
  3. Scrub the entire auger, paying special attention to the areas where grease tends to build up, such as the grooves.

Rinsing and Drying the Auger

Once you've scrubbed the auger clean, rinse it thoroughly with hot water to remove any remaining degreaser or residue. If necessary, use paper towels or rags to wipe the auger dry.

After the auger is dry, inspect it once more for any signs of residue or grease. If you find any, repeat the cleaning process until the auger is completely clean and grease-free.

Reassembling the Grill

With the auger clean and dry, it's time to reassemble your Pit Boss grill. First, ensure the auger is properly aligned and inserted back into the grill. Then, reattach the grease tray, sliding it back into place.

AD

Once the grease tray is secure, plug your grill back into the power source. However, before turning it on, perform a test run to ensure the auger is working correctly. To do this, turn the grill on and let it run for a few minutes. The auger should rotate smoothly, pushing the grease through the drip pan and out of the grease management system.

As a final step, inspect the grease management system to ensure it's working correctly and that there are no grease buildups. If everything is in working order, your Pit Boss grill is now ready for its next culinary adventure.

Regularly cleaning your Pit Boss grill's auger is not only essential for maintaining its performance but also extends its lifespan. So, make auger cleaning a part of your grill's regular maintenance routine. Happy grilling!

AD