How to Clean Algae from Empty Pool
Embracing the warmer months often means inviting friends and family over for pool parties. However, if your pool has been vacant, you might have encountered an unwelcome guest - algae. Fret not, for this comprehensive guide will walk you through how to clean algae from an empty pool, ensuring a sparkling, safe space for enjoyment.
Before delving into the cleaning process, it's crucial to understand that algae, visible as green, black, or mustard-colored patches, thrive in stagnant water with high nutrient levels. Your empty pool, devoid of regular cleaning and filtration, provides an ideal breeding ground. Let's roll up our sleeves and tackle this issue.
Preparing Your Empty Pool for Cleaning
Safety should be your first priority when dealing with an algae-infested pool. Wear protective clothing, gloves, and eyewear to shield yourself from chemicals and potential contaminants.
Before you begin, ensure your pool is empty. Drain the water below the skimmer line to prevent any clogging when cleaning. If your pool has a vinyl or concrete surface, avoid draining completely to preserve the walls and floor from cracking due to evaporation.
Draining and Re-filling the Pool
If you have a marital or chlorinated pool, drain it using a submersible pump or your filtering system's waste line. Keep a close eye on the water level to avoid damaging your pool's structure.
Re-fill the pool with fresh water, stopping at the mid-point. This will allow you to easily access the pool's surfaces for scraping and brushing while preventing pool water from overflowing during the cleaning process.
Gathering Your Cleaning Tools
Before diving into the cleaning process, arm yourself with the necessary tools. You'll need:
1. A stiff-bristle pool brush
2. A pressure washer or a tile and vinyl pool brush to tackle hard-to-reach areas
3. A sodium tetraborate cleaning solution or muriatic acid (for vinyl pools only)
4. A pool vacuum
Removing Algae from Pool Surfaces
Now that your pool is partially re-filled and your tools are ready, it's time to tackle the algae growth directly.
For Marital Pools
Start by applying a sodium tetraborate cleaning solution onto the walls of your pool, using your pool brush to work the solution into the algae. Let the solution sit for about 30 minutes, then vigorously scrub the areas with your brush. Rinse thoroughly with clean water afterward.
For any hard-to-reach or stubborn algae patches, consider using a pressure washer or a tile and vinyl pool brush. Adjust the pressure washer nozzle to a 25-degree angle and direct the spray at the algae, keeping a consistent distance from the surface to avoid damaging it.
For Vinyl Pools
Vinyl pools require a different cleaning approach due to the material's susceptibility to corrosion and discoloration. Muriatic acid is often used, which should be applied sparingly and with great caution, following the manufacturer's instructions to the letter.
Apply the acid solution onto a damp, non-metallic surface, such as a plastic pump-up sprayer, and gently distribute it across the pool walls. Scrub the algae using a vinyl-safe brush, working in a circular motion. Rinse thoroughly afterward.
Vacuuming the Pool Floor
With the walls and floor prepped, it's time to vacuum the remaining algae from the pool's bottom. If you have an automatic roboter, this step would be a breeze. For those without, an exhibition vacuum will do the trick.
Manual Vacuuming
Connect your vacuum to the pool's skimmer, ensuring it's installed properly and filled with water. Allow the vacuum head to sink to the pool floor before maneuvering the vacuum pole to ensure the vacuum head adheres to the surface.
Begin vacuuming from one corner of the pool, working your way across the floor in overlapping strokes. Vacuum at a steady, slow pace to avoid disturbing the settled algae and ensure all residue is collected in the skimmer basket.
Once complete, remove the vacuum from the pool and hose out the skimmer lines to clean out any remaining algae. Backwash the filter for 2-3 minutes to remove any clogged debris, then re-fill the pool to the desired level.
Regular pool maintenance will help prevent algae growth in the future. Ensure your filter system is functioning optimally, maintain balanced water chemistry, and run your pool pump daily for 8-10 hours to circulate and aerate the water.
Enjoying your clean pool once again, you might be tempted to purchase an algae-fighting chlorine tablet or clarifier. While these can aid in preventing future algae growth, it's crucial to remember that they work best when your pool water is already clean and balanced. So, let this visibly algae-free pool be your reward, signaling another successful cleaning project conquered.