how to clean a hot tub shell

How To Clean A Hot Tub Shell

By James Wilson
AD

Regular maintenance of your hot tub can ensure its longevity and keep it looking pristine, and cleaning the shell is a key part of this routine. The shell, typically made of acrylic, fiberglass, or vinyl, is exposed to constant water contact, chemicals, and regular user traffic. Here's a comprehensive guide on how to clean a hot tub shell, tailored to each shell material and ensuring your hot tub remains a sanctuary of relaxation.

Before diving into the cleaning process, make sure your hot tub is not in use and has been powered off. Always prioritize safety when handling hot tub maintenance tasks.

Cleaning Acrylic Shells

Acrylic shells are durable and easy to clean, making them a popular choice for hot tubs. Follow these steps to maintain your acrylic shell's glossy finish:

AD
How to Clean a Hot Tub With Vinegar: A Complete Guide
How to Clean a Hot Tub With Vinegar: A Complete Guide
how to clean the scum ring around a hot tub
how to clean the scum ring around a hot tub
How to Clean The Inside Shell of a Hot Tub
How to Clean The Inside Shell of a Hot Tub

The cleaning process begins with a simple drainage. Drain your hot tub completely, ensuring no water remains in the shell. Then, dry the interior with a clean towel, paying special attention to any crevices or corners.

Basic Cleaning

Start by giving the shell a thorough rinse with clean water to remove any initial dirt or debris. Use a soft-bristled brush or a non-abrasive sponge to gently scrub the surface in a circular motion. Avoid using steel wool or harsh chemicals that could scratch or damage the acrylic.

7 Household Products to Clean Your Hot Tub
7 Household Products to Clean Your Hot Tub
How to Clean a Hot Tub
How to Clean a Hot Tub

After scrubbing, wipe down the shell with a clean, damp cloth to remove any residue. Buff the shell dry with a clean, dry towel to reveal a shiny, clean surface.

Dealing with Stains

Stains can occur on acrylic shells due to improper chemical balance, sweat, or organic materials. To tackle these, create a solution of one tablespoon of Kast-Kleen cleaner and one gallon of warm water. Dip a soft-bristled brush into the solution and gently scrub the stained area. Let the solution sit for 15-20 minutes before rinsing and buffing dry.

AD

Note: Always test any cleaners on a small, hidden area of your shell before applying them extensively to ensure they don't cause discoloration or damage.

Cleaning Fiberglass Shells

Fiberglass shells are also durable and low-maintenance but require a slightly different approach to cleaning:

As with acrylic shells, start by draining your hot tub completely and drying the interior. Begin the cleaning process by rinsing the shell with clean water to remove any dirt or debris.

AD

Strip and Wax Method

One recommended method for cleaning fiberglass shells involves stripping the old wax and applying a new layer. Start by using a fiberglass cleaner or a mild soap solution to clean the shell. Rinse thoroughly and let it dry completely.

Next, use a fiberglass polishing compound to apply a fresh layer of wax. Buff the shell with a clean, dry towel to reveal a shiny, protected surface. This method not only cleans the shell but also provides a layer of protection, extending its lifespan.

Tip: Regular application of a fiberglass protector can help maintain the shine and prevent fading or oxidation, reducing the need for frequent stripping and waxing.

AD

Tackling Scratches

Fiberglass shells can develop scratches over time, which can be addressed using a filler and polish method. Start by cleaning the area around the scratch to ensure the filler adheres properly. Apply fiberglass filler to the scratch using a small applicator pad or Popsicle stick, working in thin layers and allowing it to dry between applications. Sand the filler lightly with fine-grit sandpaper, then buff with a fiberglass polish to blend the scratch into the surrounding surface.

Note: This method works best on shallow scratches. Deep scratches may require professional repair.

Cleaning Vinyl Shells

Vinyl shells require careful maintenance to keep them looking their best:

Drain your hot tub completely and dry the interior. Begin by testing the pH of your hot tub water. Vinyl shells require a balanced pH level (7.0-7.6) to prevent damage and discoloration. If the pH is too high or low, make the necessary adjustments before cleaning.

Regular Cleaning

Use a mild soap or a vinyl cleaner specifically designed for hot tub shells. Dip a soft-bristled brush or microfiber cloth into the cleaner and gently scrub the surface in a circular motion. Avoid using harsh chemicals or abrasive materials, as they can damage the vinyl.

After scrubbing, rinse the shell thoroughly with clean water. Wipe down the shell with a clean, damp cloth to remove any residue, then dry it completely with a clean, dry towel. Buff the surface lightly with a soft cloth to restore the vinyl's gloss.

Removing Stains

To tackle stubborn stains on vinyl shells, create a solution of equal parts white vinegar and warm water. Dip a soft-bristled brush into the solution and gently scrub the stained area. Let the solution sit for 15-20 minutes before rinsing and buffing dry. Always test any stain removers on a small, hidden area before applying them extensively.

Tip: Regularly apply a vinyl protectant to shield the surface from sun damage, chemical exposure, and other environmental factors that can cause fading, cracking, or discoloration.

Regular cleaning and maintenance can help extend the lifespan of your hot tub shell, ensuring it remains a inviting and relaxing space for years to come. Always prioritize safety when handling cleaning tasks, and don't hesitate to consult a professional if you're unsure about any aspect of the process. Enjoy your hot tub andstsense of relaxation and well-being it brings to your life."

AD