How to Clean a Hearing Aid: Step-by-Step Video Guide
Caring for your hearing aid is crucial to ensure it functions optimally and lasts long. One of the key maintenance tasks is regular cleaning. Today, we're going to guide you through a step-by-step process on "How to Clean a Hearing Aid: A Comprehensive Guide".
Cleaning your hearing aid is not just about keeping it dirt-free; it's also about maintaining the delicate electronics that amplify sounds for you. Let's dive into the details of this essential task.
Assembling Your Cleaning Kit
Before you start, gather your cleaning kit. You'll need a soft, dry cloth, a clear picks tool, a hearing aid soap or cleaning solution, and a small container for soaking. You might also need a small brush for tough-to-reach areas.
My personal favorite is the Sonic Bomb brand's hearing aid cleaning kit. It comes with a cleaning brush, a wax pick tool, and a universal drying box. Remember, never use water or other liquids to clean your hearing aid unless the instructions specifically allow it.
Basic Daily Cleaning
Daily cleaning is the first step in keeping your hearing aid in good condition. Start by removing your hearing aid and examining it visually. Use the soft cloth to gently wipe away any visible dirt or earwax. Be careful around the speaker and microphone to avoid pushing debris inside.
Always clean your hearing aid over a soft surface like a pillow or towel. If you see earwax in the sound outlet, use the clear wax pick to gently remove it. If you're unsure about any part of this process, don't hesitate to contact your audiologist for guidance.
Deep Cleaning: Soaking Your Hearing Aid
Once a week or so, perform a deeper clean by soaking your hearing aid. First, turn it off and open the battery door. Then, gently place your hearing aid in the cleaning solution. Follow the instructions on the bottle for the appropriate soaking time, usually around 10-15 minutes.
After soaking, use the brush to gently scrub any remaining wax or debris, being careful not to damage the sensitive parts. Rinse with clean water (again, only if instructions allow), and pat dry with the soft cloth. Let it air dry completely in a safe place before putting it back on.
Cleaning Specific Hearing Aid Components
Different types of hearing aids have unique features and parts. Let's look at how to clean some of these components.
ear moulds and eartips: These can be cleaned with mild soap and warm water, then air-dried. Some people prefer to use special earwax remover products designed for this purpose.
Cleaning Receiver-In-The-Ear (RIC) and Behind-The-Ear (BTE) Devices
RIC and BTE hearing aids have a behind-the-ear component that can be cleaned using the same methods described for daily and deep cleaning. Pay special attention to the area where the earmould or eartip connects to the hearing aid, as earwax tends to accumulate here.
Due to their shape, these hearing aids might need an extra tool for thorough cleaning. A small, soft-bristled toothbrush or a hearing aid brush can help reach those hard-to-get-at spots.
Cleaning Completely-In-The-Canal (CIC) and In-The-Canal (ITC) Hearing Aids
These tiny hearing aids can be more challenging to clean. Use a clear wax pick to remove any earwax from the sound outlet. If you notice earwax inside the hearing aid, carefully use the pick to remove it. For daily cleaning, you might need a small, soft-bristled brush designed for hearing aids.
Remember, never push the wax pick or brush into the hearing aid too far, as it could cause damage. If you're having trouble cleaning your CIC or ITC hearing aid, don't hesitate to consult your audiologist.
Regular cleaning is key to keeping your hearing aid in top condition. But did you know that's just the tip of the iceberg? In our next article, we'll delve deeper into how to maintain your hearing aid's batteries. Stay tuned!