How to Clean a Hayward Filter
Keeping your Hayward filter in tip-top condition is crucial for maintaining a sparkling clean pool. Over time, filters can accumulate dirt, debris, and oils, leading to reduced efficiency and potentially costly repairs. The good news is, cleaning your Hayward filter is a straightforward process that anyone can do. Let's dive into a step-by-step guide on how to clean your Hayward filter effectively and efficiently.
Before we begin, gather your tools. You'll need a flathead screwdriver, a Phillips screwdriver, a filter cleaner, a garden hose with a spray nozzle, a bucket, and, of course, your Hayward filter. Ensure your pool is turned off and the filter is in 'Filter' mode before starting.
Backwashing and Initial Inspection
Backwashing is the first step in cleaning your Hayward filter. It reverses the water flow to remove dirt from the media. Here's how:
Initial Backwashing
Turn the multi-port valve to 'Backwash'. Then, open the valve on the waste line and run the pump for about 2-3 minutes. This should remove the majority of dirt.
Inspect the Filter Pressure Gauge
After backwashing, check the filter pressure gauge. Ideal pressure should be around 8-10 PSI. If it's higher, it's a sign that your filter needs a thorough clean.
Accessing and Removing the Filter Element
Now that you've backwashed, it's time to access and remove the filter element for a deep clean.
Removing the Top of the Filter Tank
Use a Phillips screwdriver to loosen and remove the clamp bands that secure the top of the filter tank. Then, gently lift off the tank top.
Removing the Filter Element
Turn the large, central'ouvé (or lock) knob counterclockwise to release the filter element from the tank. Then, pull it out gently. Be prepared for some dirt and debris to fall out.
Cleaning the Filter Element
Now that your filter element is out, it's time for a deep clean.
Rinse the Element
Use a garden hose with a spray nozzle to rinse the element thoroughly, being careful not to damage the media. All visible dirt and debris should be gone.
Soaking the Filter Element
Mix a solution of Hayward filter cleaner or a similar product with hot water according to the package instructions. Submerge the filter element in the solution and let it soak for the suggested time (usually around 4-6 hours).
Reassembling and Reinstalling the Filter
After soaking, it's time to reassemble and reinstall your clean filter.
Rinse and Inspect the Filter Element
Rinse the filter element thoroughly to remove any remaining cleaner. Inspect it for any signs of wear or tear. If it's damaged, it may be time for a replacement.
Reinstalling the Filter Element
Place the filter element back into the tank, making sure it's properly seated. Then, turn the central knob clockwise to secure it in place.
Final Checks and Maintenance
With your filter element cleaned and reinstalled, there are a few final checks to ensure everything is working perfectly.
Reassemble the Filter Tank
Replace the tank top and secure it with the clamp bands, ensuring they're tight but not overly tight.
Check the Multi-Port Valve
Turn the multi-port valve back to 'Filter' and run the pump for a few minutes to make sure water is flowing correctly through the filter.
And there you have it! Your Hayward filter is now cleaned and ready to maintain crystal clear pool water for months to come. Regular cleaning and maintenance will ensure your filter serves you well and extends its overall lifespan. Happy swimming!