how to clean 9mm smith and wesson

Smith & Wesson 9mm Cleaning: Step-by-Step Guide

By Mark Lee
AD

In the world of firearms, maintaining your weapon's cleanliness is paramount for its longevity and functionality. Today, we're diving into a step-by-step guide on how to clean your 9mm Smith & Wesson, ensuring it remains in top condition.

Before we begin, remember that regular cleaning is key to preventing malfunctions and extending your 9mm Smith & Wesson's lifespan. Now, let's get started.

Gathering Your Cleaning Kit

Your cleaning kit should consist of essential tools: a bore brush, cleaning rod, cleaned patches, a reliable solvent like Ballistol or Gun Scrubber, and a suitable lubricant such as Lucas Oil or Rem Oil.

AD
Cleaning you M&P 9mm
Cleaning you M&P 9mm
Smith Wesson Shield 9mm Post Cleaning - ArmsVault
Smith Wesson Shield 9mm Post Cleaning - ArmsVault
Smith and Wesson shield 9mm cleaning
Smith and Wesson shield 9mm cleaning

Additionally, you'll need a chamber brush, a cotton swab, a toothbrush, and some rags or a cleaning mat. With your kit ready, let's proceed.

Field Stripping Your 9mm Smith & Wesson

Begin by ensuring your weapon is unloaded and the magazine is removed. Using the takedown lever, separate the slide from the frame. Then, push out the recoil spring plug and remove the recoil spring and guide rod as an assembly.

How to clean the S&W M&P Shield 9mm
How to clean the S&W M&P Shield 9mm
How to Clean M&P Shield 9mm EZ or Equalizer with 4 Tools. Disassembly (field strip) and Re-assembly
How to Clean M&P Shield 9mm EZ or Equalizer with 4 Tools. Disassembly (field strip) and Re-assembly

Next, lift the barrel out of the slide. Now, your Smith & Wesson is field stripped and ready for cleaning.

Cleaning the Barrel and Breech Face

Using a bbox or a cleaning rod with a patch tip, apply a few drops of solvent to a patch and Holding the rod firmly against the chamber end of the barrel, pull the patch through the bore using a smooth, back-and-forth motion.

AD

Inspect the ejected patch. If it's still dirty, repeat the process until the patch comes out clean. Then, apply a light coat of lubricant to the barrel's interior. To clean the breech face, use a brush and some solvent to scrub away any carbon or debris.

Cleaning the Slide and Frame

Start with the slide. Apply solvent to a cotton swab or a toothbrush and gently scrub the interior, taking care not to damage the Tactical Night Sights.

Use a chamber brush to clean the chamber, and a bore brush to scrub the ejection port. After scrubbing, use clean, dry patches to wipe away any remaining solvent and ensure both the slide and frame are completely dry.

AD

Cleaning the Magazine

Disassemble your magazine by removing the basepad. Clean the follower and spring with a brush and solvent, ensuring no remnants of debris remain. Wipe them dry and reassebly the magazine.

Perform a function check to ensure your 9mm Smith & Wesson is cycling smoothly and correctly. If everything feels right, it's time to apply a light coat of lubricant to metal-on-metal points, such as the slide rails and takedown lever.

Congratulations, your 9mm Smith & Wesson is now clean and ready for action. Regular cleaning is an essential habit to cultivate, ensuring your investment in a high-quality firearm doesn't go to waste. Happy shooting and stay safe!

AD
AD