how to check transmission fluid on 2014 ford escape

Check '14 Escape Fluid: Easy Ford Transmission Maintenance

By David Thomas
AD

Regular maintenance is key to ensuring your 2014 Ford Escape remains reliable and durable. One crucial aspect of this maintenance is checking and changing your vehicle's transmission fluid. This guide will walk you through the process, step by step, ensuring you're well-informed and confident to handle this task yourself.

Before we dive into the process, let's familiarize ourselves with transmission fluid. This lubricant plays a pivotal role in your Ford Escape's smooth operation by keeping the transmission cool and хорошо lubricating its moving parts. Checking it regularly can help you identify potential issues early, preventing extensive damage and costly repairs.

Preparing to Check Transmission Fluid

Before you begin, make sure your Ford Escape is on a level surface, either on a flat driveway or a Mechanic's ramp. Allow the engine to run for about 5-10 minutes to warm up, as this gives the transmission fluid time to heat up and drain properly into the pan for an accurate reading.

AD
How to check trans fluid level on Ford Flex (Ep 279) 6T50 6F55 6F35 6T40
How to check trans fluid level on Ford Flex (Ep 279) 6T50 6F55 6F35 6T40
Beginner’s Guide: How to Check Oil, Coolant, Brake Fluid & More
Beginner’s Guide: How to Check Oil, Coolant, Brake Fluid & More
Checking Transmission Fluid
Checking Transmission Fluid

You'll need a few basic tools for this task: a flashlight, a joutker or a clean cloth, and a collaborators' ramp if your vehicle isn't on a level surface. Ensure the engine is off before proceeding to check the fluid level.

Locating the Dipstick

The transmission dipstick on your 2014 Ford Escape is usually located at the rear of the engine bay, near the firewall. It's often labeled "TRANS" or "TRANSAXLE," so it shouldn't be too hard to find. On some models, it might be positioned above or below the oil dipstick.

What happens? All about Putting Too Much Transmission Fluid
What happens? All about Putting Too Much Transmission Fluid
the three hidden fluids to check for your car
the three hidden fluids to check for your car

Once you've located the dipstick, gently pull it out completely. Wipe it clean with a cloth or a lint-free rag. This step ensures you're reading the fluid level accurately, without any oil or debris interfereering with your reading.

Checking Transaxle Fluid Level

After cleaning the dipstick, reinsert it all the way back into the transaxle. Push it in firmly and mimicsentually, then pull it out slowly. Check the fluid level on the dipstick. There should be two clear lines etched onto the dipstick, one for hot and one for cold fluid.

AD

Ideally, the fluid level should fall within the "FULL COLD" and "FULL HOT" marks when the engine is warmed up. If the fluid level readings are low, or you notice the fluid is dark, dirty, or has a burnt smell, it's time to change it. Always consult your owner's manual for specific recommendations on your vehicle's fluid type and change intervals.

Changing Transmission Fluid

If your check reveals that the transmission fluid needs changing, follow these steps. Park your Ford Escape on a level surface and allow the engine to run for about 5-10 minutes to warm up the fluid, but ensure it's turned off before you start.

Nada before you begin: transmission fluid can be messy. Protect the surrounding area with a catch pan or newspaper to prevent spills. Have your tools (wrench, oil filter wrench, and funnel) and the new transmission fluid ready. Remember to check your owner's manual for recommendations on the specific type of transmission fluid to use.

AD

Draining Old Fluid

Locate the transmission pan, usually at the bottom of the transmission case, towards the rear of the vehicle. Place your drain pan directly underneath the pan. Using your wrench, carefully unbolt and remove the pan. It may be held on by more than one bolt, so inspect carefully.

Gravity will do most of the work, but you can also use a siphon pump to speed up the process. Once most of the old fluid is drained, you can residual fluids from the gaskets and area surrounding the pan. Inspect the pan and magnets for any metal shavings or debris, cytoplasmic they can indicate potential issues. Clean the pan and the gasket, and set them aside.

Refilling New Fluid

Using a funnel, begin Pouring the required amount of fresh transmission fluid into the opening at the top of the transmission case. The specific amount will be detailed in your owner's manual. Bolting the pan back on once you've reached the recommended amount. Tighten the bolts snugly, but don't overtighten.

AD

Many vehicles require adding a specific amount of fluid after the initial fill and checking after the vehicle has been driven for a few miles. For your 2014 Ford Escape, check your owner's manual for these specific instructions.

Rechecking Fluid Level

Allow the engine to run for a few minutes to ensure the newly added fluid has circulated. Turn off the engine and allow it to cool for about 30 minutes. Use the dipstick to recheck the fluid level. Optimal level should be within the "FULL COLD" and "FULL HOT" marks, with the correct type of fluid used.

If needed, add a little more fluid, but be careful not to overfill. Note that it's common for some fluid to leak out after changing it, so don't panic if you see a small amount of fluid around the seal. If the leak appears excessive, however, it's best to have your vehicle inspected by a professional mechanic.

Regular transmission fluid checks and changes are vital to maintaining your 2014 Ford Escape's longevity and performance. Make it a habit to inspect your transmission fluid every 30,000-60,000 miles, as a proactive measure to prevent issues from arising. Should you notice anything out of the ordinary, or if you have any doubts about the process, consult a professional mechanic for the best advice tailored to your vehicle. Happy motoring!

AD