how to check subaru cvt transmission fluid

Check Subaru CVT Transmission Fluid: Step-by-Step Guide

By Daniel Taylor
AD

Your Subaru's Continuously Variable Transmission (CVT) is a critical component that requires regular maintenance to ensure its longevity and optimal performance. Checking the CVT transmission fluid level is a simple yet crucial task that can help you detect potential issues early and maintain your vehicle's reliability. Here's a step-by-step guide on how to check your Subaru CVT transmission fluid, tailored specifically for Subaru vehicles.

Before you begin, ensure your vehicle is on a level surface and has been idling for a few minutes to allow the fluid to fully circulate and settle. Once your Subaru is ready, follow these instructions to check your CVT transmission fluid level efficiently and accurately.

Preparation and Safety Measures

Before you start, gather the necessary tools. You'll need a 10mm socket wrench, a funnel, and a flashlight. For better visibility, place your Subaru on a torque converter or jack stands if possible. Additionally, follow these safety measures:

AD
How to Check Transmission Fluid in Your Automatic Car
How to Check Transmission Fluid in Your Automatic Car
How To Change Transmission Fluid (CVT Oil) - 2017 Subaru Outback
How To Change Transmission Fluid (CVT Oil) - 2017 Subaru Outback
When (And Why) Did Subaru Start Using CVT Transmissions? - SlashGear
When (And Why) Did Subaru Start Using CVT Transmissions? - SlashGear
  • Ensure your vehicle is cool; perform the check after the engine has cooled down to prevent any burns.
  • Wear gloves to protect your hands from fluid spills and contaminants.
  • Have a spare cloth and a maintenance fluid catcher nearby to clean any spills.

Locating the CVT Dipstick

The CVT transmission on your Subaru shares the same dipstick with the engine oil. To locate the dipstick, follow these steps:

  1. Open the hood and locate the engine compartment.
  2. Find the dipstick protruding from the engine towards the passenger side. The dipstick will have both engine oil and CVT fluid level markings.

Checking the CVT Transmission Fluid Level

Now that you've located the dipstick, it's time to check the fluid level. Follow these steps:

Checking Transmission Fluid
Checking Transmission Fluid
How to Change Transmission Fluid? A Step By Step DIY Guide
How to Change Transmission Fluid? A Step By Step DIY Guide
  1. Pull the dipstick out completely and wipe it clean with a lint-free cloth or disposable gloves.
  2. Re-insert the dipstick fully about five times to ensure it's thoroughly coated with fluid from the transmission.
  3. Pull it out again slowly and examine the fluid level. You should see two distinct sets of markings: "ADD" and "FULL" on the top and "LOW" and "Lipa" (notches on the dipstick) on the bottom for engine oil and CVT fluid, respectively.

For the CVT fluid, the ideal level should fall within the "FULL" range, marked between the two notches. If the level is below the "LOW" mark, it's time to top off the fluid. However, keep in mind that checking the CVT fluid level this way is not the most accurate method, especially if your vehicle is driven frequently or at high mileage. In such cases, it's recommended to consult your Subaru dealer or a trusted technician for a professional diagnosis.

Topping Off the CVT Transmission Fluid

If your CVT fluid level is low, you'll need to add fluid to bring it back up to the "FULL" range. Always use Subaru-approved CVT fluid, such as Subaru nano interfere-free ATF (CVTF) or a reputable equivalent. Adding the wrong type of fluid can cause serious damage to your CVT. Follow these steps to top off the fluid:

AD

Determining the Amount of Fluid to Add

First, calculate the amount of fluid to add based on the distance between the "LOW" and "FULL" marks on the dipstick and the location of the low-level indicator. Consult your Subaru owner's manual or workshop manual for a more accurate calculation, as it will provide specific information for your vehicle model and year.

Adding CVT Transmission Fluid

Once you've determined the amount of fluid to add:

  1. Using a funnel, slowly pour the Subaru-approved CVT fluid into the dipstick hole until you've reached the required level.
  2. Allow the fluid to settle for a few minutes, then recheck the level using the dipstick.
  3. Repeat the process if necessary until the fluid level reaches the "FULL" range.

After adding the fluid, start your Subaru and let it idle for a few minutes. Recheck the fluid level one more time while the engine is running to confirm that the dipstick is indicating the correct level. If the level is still low, your Subaru's CVT might have a leak, and it's essential to consult a professional mechanic promptly.

AD

Regular Maintenance and Professional Inspections

To keep your Subaru's CVT in optimal condition, make regular fluid checks a part of your maintenance routine. While the dipstick method is not the most accurate, it can help you identify severe issues early. Additionally, consider consulting your Subaru dealer or a trusted technician for a professional CVT inspection and fluid change, especially if your vehicle has high mileage or is driven frequently.

Remember, regular maintenance and prompt attention to potential issues can significantly extend the lifespan of your Subaru's CVT and ensure your vehicle remains reliable and enjoyable to drive. Happy maintaining!

AD