how to check cv joint is bad

How to Inspect CV Joint Wear and Tear

By Amanda Thompson
AD

Constantly hearing a clicking sound while driving, or feeling your vehicle vibrate when accelerating could be more than just a minor annoyance - it might indicate a bad CV joint. CV, or constant velocity, joints are ball-and-socket type mechanisms that connect your vehicle's wheels to its transmission. They allow your wheels to move up and down, and side to side, while maintaining consistent drive force. If you suspect your CV joints are faulty, it's crucial to check them promptly to prevent further damage or unsafe driving conditions. Here's a comprehensive guide on how to diagnose a bad CV joint.

To start, let's understand the symptoms of a worn-out CV joint. It's not always easy to determine if a CV joint is bad, especially for non-experts. However, there are some common signs to look out for.

Identifying symptoms of a bad CV joint

Before you jump into checking your CV joints, you should know what to look for. Bad CV joints often manifest similar symptoms due to the increased play and internal damage caused by excessive wear.

AD
How to Check if a Ball Joint is Bad
How to Check if a Ball Joint is Bad
The EPIC life of a mechanic 103! #shorts #cvjoint #driveshaft
The EPIC life of a mechanic 103! #shorts #cvjoint #driveshaft
Worn inner CV joint
Worn inner CV joint

Here are some common red flags that indicate your CV joint might be on its last legs:

Uneven tire wear

If your tires are showing signs of uneven wear, especially on the edges, it could be due to a damaged CV joint. CV joints play a crucial role in maintaining consistent contact with the road, and when they wear out, it can cause excessive wear on your tires.

4 Symptoms of CV Axle Going Bad (How to Fix & Replacement Cost)
4 Symptoms of CV Axle Going Bad (How to Fix & Replacement Cost)

ilia>

Popping or clicking noises

One of the most telltale signs of a bad CV joint is a popping or clicking sound that occurs when turning your vehicle's steering wheel or accelerating. This sound is the result of the joint's components separating and then rejoining due to worn-out cv joint boot or inner components.

AD

Locating and inspecting CV joints

Now that you know what to look for, let's discuss how to locate and check your CV joints. First, we need to know where the CV joints are situated - on the outer edge of your vehicle's wheel, attaching to the drive shaft.

Preparation

Before you start, make sure your vehicle is safely parked on a flat surface and the engine is cool. You'll need a jack, jack stands, lug wrench, a flashlight, and a chisel or small pry bar. For a more thorough inspection, you might want a CV joint separator tool, which can be purchased at most auto parts stores.

AD

Jacking up the car

First, use the jack to lift the side of your vehicle where you suspect the bad CV joint. Place the jack stands on the appropriate manufacturer-designated points to stabilize the vehicle.

Once you've safely stabilized your vehicle, it's time to remove the lug nuts and the tire. This will provide better access to the CV joint and axle components. Always remember to place the wheel and lug nuts nearby for easy access when re-assembling.

AD

Inspecting the CV joint boot

The CV joint consists of the inner CV joint (connecting to the axle), the outer CV joint (connecting to the wheel), and the CV joint boot, which houses and protects the inner workings of the joint. The first step in checking your CV joints is to inspect the condition of the CV boot.

Using your flashlight, visually inspect the CV boot for any tears, cracks, or punctures. The boot should be grease-free and tightly fitted without any signs of wear. If the CV boot is damaged, it's a clear indicator that the CV joint is bad and needs to be replaced.

Checking for play and excessive wear

If the CV boot appears intact, the next step is to check for excessive play in the CV joint. With the tire and wheel removed, use the chisel or small pry bar to gently separate the CV joint from the, ensuring that the axle is not twisting.

With the joint separated, try moving the inner joint through its range of motion - up and down, and side to side. If there's excessive play or a squeaking sound, it's a strong indication that your CV joint is worn and needs to be replaced. Additionally, if you notice grease on the outside of the inner joint or on the axle shaft, it suggests that the inner joint is also bad.

Separating the CV joint (if necessary)

If you have a CV joint separator tool, you can use it to fully separate the CV joint for a more thorough inspection. Follow the tool's instructions, ensuring that you do not damage any components in the process. With the joint separated, you should be able to see signs of excessive wear, such astfrac marks, worn-out balls, or broken retaining clips.

Replacing a bad CV joint

If you've confirmed that your CV joint is bad, it's essential to replace it promptly to prevent further damage to your vehicle's drivetrain. While many people consider CV joint replacement a complex task, it's relatively straightforward with the right tools and some mechanical intuition. Here's a brief overview of the process:

Gathering tools and parts

To replace your CV joint, you'll need an assortment of tools, including jack stands, wheel chocks, a jack, a breaker bar, a deep socket, a press fork kit, aCV joint separator tool (if you don't have one already), new CV joints, and new boots and grease.

Removing the old CV joint

Begin by safely lifting and securing your vehicle using jack stands. With the tire still removed, use the breaker bar and deep socket to loosen the CV joint's nut. Once the nut is loose, carefully strike it with a hammer to break it free. Next, remove the cotter pin and washer, and use a rubber mallet to tap the joint off the splines.

Installing the new CV joint

First, install the new CV boot onto the new joint. Ensure that the joint's arrowspoint towards the outer side of the vehicle. Next, apply some grease to the splines and inner joint, then slide the new joint onto the axle splines, ensuring that it fits securely.

Replace the washer and cotter pin, then torque the CV joint nut to the manufacturer's recommended specification. Reassemble the tire and lug nuts, and lower your vehicle from the jack stands.

With a thorough understanding of how to check and replace a bad CV joint, you're now equipped to diagnose and address this issue independently. Regularly inspecting your vehicle's CV joints can help prevent unexpected breakdowns and costly repairs down the line. So, stay safe, and happy driving!

AD