How to Test Refrigerator Compressor
A refrigerator's compressor is its heart, powering the cooling system that keeps your food fresh. But like any mechanical part, it can fail, leading to spoilt groceries and expensive repairs. Regular checks can extend your compressor's lifespan and prevent unexpected breakdowns. Here's a comprehensive guide on how to check your refrigerator compressor.
Before we begin, safety first! Unplug your refrigerator and allow it to stand for at least 30 minutes to let the compressor oil settle. Now, let's dive in.
Understanding Refrigerator Compressors
Your refrigerator's compressor is a pump that circulates refrigerant through the system. It works by compressing refrigerant gas, turning it into high-pressure liquid, which then absorbs heat from inside your fridge, cooling it down.
With this understanding, let's explore how to check if your compressor is working correctly.
Checking for Running Sound
Refrigerator compressors make a distinct, rhythmic humming sound when they're running. If your fridge is quiet when it should be cooling, it might indicate a compressor issue. However, a lack of sound doesn't always mean a compressor failure, as issues like faulty startup relays or defrost timers can also cause silence.
To confirm if the compressor is indeed not running, listen closely to the back of your fridge. The compressor is usually located here, and a humming sound could help identify its location if you're unsure.
Visual Inspection and Cleaning
Dirt and dust can settle on your compressor over time, affecting its efficiency and lifespan. A quick visual check and cleaning can help maintain your compressor's health. Here's how:
1. Unplug your fridge and remove the compressor housing's cover, usually secured by screws. Make sure to take a photo of the wiring beforehand to aid reassembly.
2. Look for any visible damage, such as burns, leaks, ororum buildup. Also, check if the capacitor's cover is bulging, as this could indicate a fault.
3. Gently clean the compressor using a soft brush and a vacuum to remove any dust or debris. Be cautious not to bend any wires or damage the compressor.
Testing the Compressor
If your compressor isn't running, and you've ruled out simple fixable issues, it might be time for a more in-depth test. This involves checking the compressor's continuity and resistance with a multimeter.
Before proceeding, ensure you understand the risk involved. If unsure, consult a professional to avoid potential injury or damage.
Checking Compressor Continuity
Disconnect the wires from the compressor terminals and set your multimeter to the lowest ohms setting (usually 200-ohms). Touch the probes to two of the compressor terminals. If the compressor is good, you should get a low reading, less than 5 ohms. A reading of 'OL' (over limit) or a high number indicates a faulty compressor.
If your compressor has four terminals, test all possible combinations (1-2, 1-3, 1-4, 2-3, 2-4, 3-4). If you get a reading only in certain combinations, your compressor might have an internal short or open circuit.
Checking Compressor Resistance
Now, set your multimeter to the highest ohms setting (usually 200k-ohms). Test the compressor's resistance between each terminal pair. A good compressor should show a high resistance reading, around 15-20k ohms. A low reading or 'OL' could mean the compressor is shorted.
Remember, these tests are provisional. A compressor might still fail despite passing these checks, due to other issues like start relay problems or leaky refrigeration circuits.
If you've narrowed down the issue to the compressor, it's time to consider a replacement. Refrigerator compressors are not DIY repairs due to their refrigeration gas content. Always contact a trained professional for installation.
Regular checks and maintenance can extend your compressor's lifespan, but nothing beats professional servicing. Schedule routine checks with a trusted technician to keep your refrigerator in tip-top shape. And always remember, safety first when handling electrical appliances.